Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Breaking FZS600 for spares
#1
As all are probably aware, my Fazer 600 had a bit of a prang last weekend. And as I'm going to the US in October, I have no time (or money) to repair it. So, sadly, I have to break for spares.

The bike is currently with RED98, please post which parts you want below to confirm availability / existence. As a rule of thumb, if it's behind the bars, it's probably OK!

The engine and carbs are in good condition, but please allow a few days for the postal service to get the spare key to Red98!

Special/non stock parts for sale:

- Towbar (consider it a rear end safety device - will protect in rear end shunts, and save the rear fairing!). Heavy duty, and bolts straight on to an FZS600 (will need a Rentec rack, or the earlier grabrail): £200

- Stainless steel downpipes (for long footpegs). In decent condition, slight dent to middle pipe, purely cosmetic. £80

- Blueflame can and link pipe. Both clean, but a tad scruffy. Link pipe probably better suited for models with the shorter footrests. Will fit longer footrests with spacers. Baffles are currently removed, but will be included when they're found (I think they're either in the spares box in the trailer, or under the seat - will confirm). £40

- Rear hugger. Has a minor repair on the left hand side where it fixes to the bike. Apart from that, in reasonable condition. £20

- Rentec rack. A bit scruffy, but no visible dammage to it. Was happy lugging a 42L topbox down the motorway. Due to condition, would accept £30

- FAZER radiator guard. A rare model, I've only ever seen two like it. Mine, and one on a different project bike. Very sturdy, looks very nice. Stainless steel, I think. In excellent condition. Due to rarity and condition, £50


Sales of parts are paying off the insurance excess, and what's left will go towards a bike in the US, and travel costs.
The Deef's apprentice
Reply
#2
(10-09-13, 07:19 PM)Fizzy Pies link Wrote: Pipes dibs

Can pm me pics please?

Want the throttle side headlight plug too please






hi fizzy.....will take some pics tomorrow,weather/time permitting  Smile [size=78%] [/size]
One, is never going to be enough.....
Reply
#3
I'd be interested in the speedo drive for cheaper than cheap!?
Some say...
Reply
#4
(10-09-13, 10:10 PM)Punkstig link Wrote: I'd be interested in the speedo drive for cheaper than cheap!?

You have PM
The Deef's apprentice
Reply
#5
Interested in the exhaust ! Pics please . How much for posting or where are you to collect .
Adam
Reply
#6
I'd be interested in the front forks....

[Image: use5asub.jpg]
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup....  :-))
Reply
#7
(11-09-13, 08:52 AM)stinch182 link Wrote: Interested in the exhaust ! Pics please . How much for posting or where are you to collect .
Adam


hi adam......fizzy has first dibs on the headers,can is still for sale,will take pics of both tonight and also check condition .

bike is in high wycombe,bucks jct 4 m40.......can post but will have to check postal charges first  Smile
One, is never going to be enough.....
Reply
#8
(11-09-13, 09:00 AM)Exupnut link Wrote: I'd be interested in the front forks....

[Image: use5asub.jpg]



SOLD.......to EXUPNUT.....£500 the pair.......you can take them off yourself  :lol
One, is never going to be enough.....
Reply
#9
I'm only after the can and link pipe . Cheers Adam
Reply
#10
(11-09-13, 09:32 AM)stinch182 link Wrote: I'm only after the can and link pipe . Cheers Adam


ok matey...i was a bit unsure  :o ,will post pics tonight,weather permitting  Wink
One, is never going to be enough.....
Reply
#11
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways - Chardonnay in one hand - strawberries in the other - body thoroughly used up, totally worn out, and screaming - WOO HOO! What a Ride!"
Reply
#12
(11-09-13, 09:24 AM)red98 link Wrote: [quote author=Exupnut link=topic=9823.msg100607#msg100607 date=1378886458]
I'd be interested in the front forks....

[Image: use5asub.jpg]



SOLD.......to EXUPNUT.....£500 the pair.......you can take them off yourself  :lol
[/quote]

A definite upgrade for a slow blue bike  :rollin
Reply
#13
(11-09-13, 09:38 AM)Lazarus link Wrote: what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model

It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
The Deef's apprentice
Reply
#14
How much for the headlight unit?
[Image: 138790.png]
Reply
#15
(11-09-13, 11:57 AM)ChristoT link Wrote: [quote author=Lazarus link=topic=9823.msg100617#msg100617 date=1378888720]
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model

It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
[/quote]


cheers m8 - i think the hangers are different on the 2003 model. will keep looking
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways - Chardonnay in one hand - strawberries in the other - body thoroughly used up, totally worn out, and screaming - WOO HOO! What a Ride!"
Reply
#16
(11-09-13, 02:24 PM)Lazarus link Wrote: [quote author=ChristoT link=topic=9823.msg100634#msg100634 date=1378897041]
[quote author=Lazarus link=topic=9823.msg100617#msg100617 date=1378888720]
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model

It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
[/quote]


cheers m8 - i think the hangers are different on the 2003 model. will keep looking
[/quote]

No, they're the longer ones, therefore the right ones. The only thing to worry about is the crack (as mentionned)
The Deef's apprentice
Reply
#17
(11-09-13, 01:50 PM)Jamieg285 link Wrote: How much for the headlight unit?

The front headlight unit is in various pieces. Not for sale as it's too damaged to salvage - sorry.
The Deef's apprentice
Reply
#18
(11-09-13, 03:06 PM)ChristoT link Wrote: [quote author=Lazarus link=topic=9823.msg100667#msg100667 date=1378905843]
[quote author=ChristoT link=topic=9823.msg100634#msg100634 date=1378897041]
[quote author=Lazarus link=topic=9823.msg100617#msg100617 date=1378888720]
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model

It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
[/quote]



will try and post some pics tonight,weather permitting  Wink


cheers m8 - i think the hangers are different on the 2003 model. will keep looking
[/quote]

No, they're the longer ones, therefore the right ones. The only thing to worry about is the crack (as mentionned)
[/quote]
One, is never going to be enough.....
Reply
#19
I'd be interested in the tank if its not buggered. Can collect.


Cheers


(Told you to break it weeks ago  :lol )
Those are my principles...if you don't like them I have others.
Reply
#20
(11-09-13, 03:06 PM)ChristoT link Wrote: [quote author=Jamieg285 link=topic=9823.msg100659#msg100659 date=1378903859]
How much for the headlight unit?

The front headlight unit is in various pieces. Not for sale as it's too damaged to salvage - sorry.
[/quote]

Depends on what I want it for!

Are the reflectors intact? If they are and the price is right, I don't mind taking the broken unit and taking them out myself.
[Image: 138790.png]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)