Engine rattle/rumble on 2000

[GhostCat]

Hi I met up with a friend who has the exact same bike as me and I was amazed at how much smoother and quieter his engine was, I don't know what to do to mine to make it sound so good. Mine "chugs" a bit on tickover and there is a rattle coming from below the camshaft. The thing is, mines only done 10,000 miles and his has done over 40k. I know my carb rubbers were replaced last year. Regular oil changes etc. Standard exhaust (he has aftermarket sports)
Sorry if this seems a dumb question, hoping someone has had the same problem.

Ghostcat

Mates Fazer: https://youtu.be/9aHeQv3jjEY

My Fazer : https://youtu.be/JLelEU8_MlI

[BBROWN1664]

idle speed it too low on both. Should be 1250rpm.

Also, after doing the rubbers, did you balance the carbs?

[GhostCat]

Hi, I didn't do the rubbers, (bought bike in January)  but I just found out my neighbour has a carb tuner ! Yes the revs sit at 1100 ish, I will adjust

GC

[Disorderlypunk]

could also be the camchain adjuster is about to adjust another click - might just sort itself in a few hundred miles
i cant recall one ever siezing up and not adjusting on a fazer but its always a possibility especially as its a 2k and only done 10k so not had much oil fired around it
-how do people only do 10k in 17 years - i do 15k+ a year (but dont tell my insurance company)

[BBROWN1664]

-how do people only do 10k in 17 years - i do 15k+ a year (but dont tell my insurance company)

I have just sold my CBF1000 and bought an FZS600 to replace it. I only did 5K in 7 years on that.

[Frosties]

[quote author=Disorderlypunk link=topic=23012.msg265490#msg265490 date=1501776429]

-how do people only do 10k in 17 years - i do 15k+ a year (but dont tell my insurance company)

I have just sold my CBF1000 and bought an FZS600 to replace it. I only did 5K in 7 years on that.
[/quote]


Should match that 5k in a few months BB - it's running great  :thumbup

[Buzz]

Mine's done 45k and sounds exactly like your mate's and nothing like yours...maybe the tone changes with age as more parts wear in?

[daviee]

as most say its prolly about to self adjust the cam chain , nothing i would worry about mine has 32 k on it and sounds like your mated your mileage  is prolly about the time it will adjusts

[gingernut]

it could be exhuast caskets , is there a rattle when you accelerate hard

[vinnyb]

it could be exhuast caskets , is there a rattle when you accelerate hard

 
Is that what they bury knackered exhausts in?

[GhostCat]

Hi

borrowed my neighbours Carbtune and balanced the carbs yesterday, this was before:

[smg id=3024 type=preview align=left]

idles better now (increased to 1250 rpm)

Still got a clonky noise though, not as smooth as mates !

GC