Does the Gen 1 suffer from the dreaded...

[JayB]

...Yamaha white plug on the left hand side of the fairing?

Had this issue with my 5PW R1 recently, it was in quite a state, then yesterday, about 1 minute after the bike having been fired up from cold, the cooling fan kicks off.

Obviously, no guage to go from, so I turn the bike off, get ready to ride off and re-start, 20 seconds later, no fan.

Wonder if it is just a crappy connection causing problems?

[dazza]

Think they all do that, try putting it in gear and it should stop.

[fireblake]

As Dazza says. Mine does that, after 30 seconds at tick over the fan cuts in but as soon as a gear is selected it switches off. It's perfectly normal. Why though is another question???

[JayB]

Strange! I guess a good idea for warm weather and probably because there is no temp guage.
BUT, I did 5hit myself, being that I've just bought her, I was thinking "oh no, it's got no water in it" 

:lol

I checked last night, it has! Cheers guys. Next question coming soon!

[Falcon 269]

Yes, the fan is meant to kick in after about 1 minute or so idling from a start.  Put it in gear and it will stop the fan again.  Probably intended as a check to confirm that the fan is operating and to give it a regular spin-up.

Yes, the Gen 1 suffers a white connector problem but maybe not the same as the R1 you had.  Not connected to your fan question but you should read this to understand the connector issue.

http://www.yamahafz1oa.com/eskortsdefect...ment.shtml

While you're in the mood to learn ...

http://www.cartestsoftware.com/fz1/

http://www.yamahafz1oa.com/technicaltips.shtml

Cheers!

Mike

[james43]

That's freaky I was going to start a thread about this as mine does it and I assumed it was broken.


Weird.


Glad it's not though lol

[JayB]

Cheers Falcon 269 - found the cartestsoftware one, brilliant!

Will check and dielectric grease the connectors I can see under the left, just cause it is a good idea.