Swing arm bolt

[tomjimtom]

Hi, going to grease my swingarm bearings and such, but before I go to halfords an buy every socket between 25 and 32, can someone tell me what size the nut is?

Also, do i need to take the swingarm off completely? I've already greased the suspension etc, and got the rear wheel off


Thanks
Tom

[bludclot]

the swingarm nut takes a 27mm socket. you'll have to remove the arm in order to check / grease the two main bearings. re-torque to 125nm / 92lbft.

if you are local to portsmouth i have the tools you can borrow.

[bludclot]

when i remove a swing arm i masking tape an old newpaper to the chain side of the arm for removal and re-fitting - it prevents the chain marking the arm.

[tomjimtom]

Thanks, got the socket today on the way back from work

I'm not local enough I'm afraid, especially with a rear wheel missing  :lol but thank you for the offer.

Looks like I'll have it all apart then, which means EVERYTHING will be covered in grease

Thank you again,

Tom