Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FZ1..tyre pressures...is 36/42 as usual the universal acceptance.
#1
I know i know :rolleyes




Only ever put 36/42 in the 600 and got on just fine but just wondering whether there's any specific reason why this wouldn't be the case on the heavier FZ1......& yes im a fat bastard.....probably talking 18 stone kitted up......plus im talking a hot sunny day like tomorrow. Confusedun




I know it's a Boring subject and everyone will have an opinion about it but just seeing if anyone has a magical formula.




Cheers


Nog
Easiest way to go fast........don't buy a blue bike
Reply
#2
36/39 on my GEN 1 but the manual recommends more on the rear for 2 up .
Reply
#3
(16-05-14, 09:51 PM)esetest link Wrote: 36/39 on my GEN 1 but the manual recommends more on the rear for 2 up .


A good start for me though...it seems that 36 is a pretty reliable front tyre pressure & i suppose not much weight goes over it but im still surprised that a heavier overall bike wouldn't need slightly more even up front.




The rear i'll need to faff about with & i've actually gone up a bit to about 43/44 so i'll wait see how i get on with that combo.....but how much is too high???...i mean is 46 a bit ridiculous?
Easiest way to go fast........don't buy a blue bike
Reply
#4
(16-05-14, 10:13 PM)noggythenog link Wrote: [quote author=esetest link=topic=13149.msg148652#msg148652 date=1400273504]
36/39 on my GEN 1 but the manual recommends more on the rear for 2 up .


A good start for me though...it seems that 36 is a pretty reliable front tyre pressure & i suppose not much weight goes over it but im still surprised that a heavier overall bike wouldn't need slightly more even up front.




The rear i'll need to faff about with & i've actually gone up a bit to about 43/44 so i'll wait see how i get on with that combo.....but how much is too high???...i mean is 46 a bit ridiculous?
[/quote]


Yes noggy.


I'm pretty certain it's supposed to be 36/40 for the fz1 for standard, or 36/42 for two up/luggaged riding at speed.
As you're a bit heavier than the recommended weight, i'd probably go with the recommended 36/42 and see how that feels?
Reply
#5
(16-05-14, 10:51 PM)JoeRock link Wrote: [quote author=noggythenog link=topic=13149.msg148660#msg148660 date=1400274785]
[quote author=esetest link=topic=13149.msg148652#msg148652 date=1400273504]
36/39 on my GEN 1 but the manual recommends more on the rear for 2 up .


A good start for me though...it seems that 36 is a pretty reliable front tyre pressure & i suppose not much weight goes over it but im still surprised that a heavier overall bike wouldn't need slightly more even up front.




The rear i'll need to faff about with & i've actually gone up a bit to about 43/44 so i'll wait see how i get on with that combo.....but how much is too high???...i mean is 46 a bit ridiculous?
[/quote]


Yes noggy.


I'm pretty certain it's supposed to be 36/40 for the fz1 for standard, or 36/42 for two up/luggaged riding at speed.
As you're a bit heavier than the recommended weight, i'd probably go with the recommended 36/42 and see how that feels?
[/quote]


Cool ill stick with 36/42 then....never done me wrong previously but thought i best check.




Ta 8)
Easiest way to go fast........don't buy a blue bike
Reply
#6
Noggy , there is usually a sticker telling the reccomeded tyre pressures on the swing arm,,look !!! :eek :eek :eek :eek




i know you probably have :lol
An ageing test pilot for home grown widgets that may fail at anytime.
Reply
#7
(17-05-14, 07:18 AM)slimwilly link Wrote: Noggy , there is usually a sticker telling the reccomeded tyre pressures on the swing arm,,look !!! :eek :eek :eek :eek




i know you probably have :lol


Nah no sticker bill




Besides....what would yamaha know anyway....this is foc-u Smile
Easiest way to go fast........don't buy a blue bike
Reply
#8
The tyre pressures are in the owners manual , but in mine not in PSI , I googled  the conversion factor , can't remember what that is though . 
Reply
#9
(17-05-14, 09:20 AM)noggythenog link Wrote: [quote author=slimwilly link=topic=13149.msg148689#msg148689 date=1400307535]
Noggy , there is usually a sticker telling the reccomeded tyre pressures on the swing arm,,look !!! :eek :eek :eek :eek
:lol



i know you probably have :lol

Nah no sticker bill




Besides....what would yamaha know anyway....this is foc-u Smile
[/quote]


I will look at mine,wait a mo !!!!llalaaaa llalaaa    lallala :lol  lllalaaa llaaa  lala alallala














lalalla    lalalala  lalallalala






































lalalalalalaalalalaa  laaaa aldedlalaalalal de laaa lllllaaaaa dee lalalaa :o










lalal  lalala de daaa llaaa deee daaa :eek












ok , i am back




it says  up to 198 lbs  36 front 42 rear




Phew :lol :lol :lol :lol :lol :lol :lol :lol :lol
An ageing test pilot for home grown widgets that may fail at anytime.
Reply
#10
(17-05-14, 09:40 AM)esetest link Wrote: The tyre pressures are in the owners manual , but in mine not in PSI , I googled  the conversion factor , can't remember what that is though .
1bar = 14.5 psi.
Reply
#11
36/42 every time for me mate, whatever bike, whatever tyre, unless it's a track day, though them days are gorn...
Reply
#12
(19-05-14, 11:57 AM)ogri48 link Wrote: 36/42 every time for me mate, whatever bike, whatever tyre, unless it's a track day, though them days are gorn...


I thought that was the case ogri cheers, i had that combo the other day and i couldnt fault it.


Nice one.
Easiest way to go fast........don't buy a blue bike
Reply


Forum Jump:


Users browsing this thread: