![]() |
Reg Rec Wiring - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Reg Rec Wiring (/showthread.php?tid=83001) |
Reg Rec Wiring - Slippy - 29-09-22 Hello! The reg/rec on my fzs 600 2003 has melted the connectors! It also has been rewired so a standard oem rec/reg wont fit any more. Few questions!
Re: Reg Rec Wiring - agricola - 30-09-22 1) No 2) Yes, but good, clean soldered joints, well insulated from each other. 3) If you are buying a new RR, I believe that you can unclip the spades from the connector plug and purchase a replacement male and female connector for both ends. I have used this company before https://www.vehiclewiringproducts.co.uk/ Re: Reg Rec Wiring - unfazed - 30-09-22 45a Anderson Power Poles are the best solution and is what I used back in 2017. Neat finish and can be disconnected easier than the original was before burning out Re: Reg Rec Wiring - midden - 01-10-22 (30-09-22, 03:16 PM)unfazed link Wrote: 45a Anderson Power Poles are the best solution and is what I used back in 2017. Neat finish and can be disconnected easier than the original was before burning out How often do you need to disconnect it? Re: Reg Rec Wiring - Slippy - 01-10-22 Thanks for the replies! I’m just going to hard wire it, been advised by a mechanic friend that crimping it would be the best solution so will do that. Can’t be bothered with adding new connections to faffy and could melt again! Thanks all Re: Reg Rec Wiring - unfazed - 02-10-22 (01-10-22, 07:04 AM)midden link Wrote: [quote author=unfazed link=topic=27514.msg330369#msg330369 date=1664547366] How often do you need to disconnect it? [/quote] You would only need to have to do it once |