FZ1 and FZS wheel bearings & Seals: - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75) +--- Thread: FZ1 and FZS wheel bearings & Seals: (/showthread.php?tid=82169)

FZ1 and FZS wheel bearings & Seals: - b1k3rdude - 04-01-21 So as I needed some wheels bearing for the FZ1 I thought I would check if any of the spare bearings I still have for my FZS would fit, and some of them do - FZ1 - fowlers - https://www.fowlersparts.co.uk/parts/6391774/fz1-sa-fazer-5d01-2007-050-c/rear-wheel FZS - fowlers - https://www.fowlersparts.co.uk/parts/4189081/fzs1000-1c28-2005-050-a/rear-wheel Front wheel: (FZS part numbers same) 2x bearing (ball)- 93306-00420 2x seal - 93106-28043 Sprocket carrier: (FZS part numbers same) 1x bearing (ball)- 93306-20531 1x seal - 93106-40013 Rear Wheel (FZ1): 1x R/H bearing (ball) - 93306-20531 - bearing number 62-28-2-RS 1x R/H seal - 93106-40013 - seal number 40-58-7 1x L/H bearing (roller) - 93317-33590 -  bearing number 35-20-2-RS Rear Wheel (FZS): 1x R/H bearing (ball) - FZS - 93306-07806 - bearing number 62-28-2-RS (so same as FZ1) 1x R/H seal - 93106-35042 - seal number 35-52-8 1x L/H bearing (roller) - 93317-43580 - bearing number  35-20-2 RS (so same as FZ1) So the only part that different between both bikes is the R/H (exhaust side) seal, so this means the R/H wheel spacer has different ID/OD between the two bike's. I personally prefer to source all my bearings/seals from Marksman Industrial, as you can put in the Yamaha (or Suzuki, Honda etc) and it will find your bearing/seal for you. They also have 'bearing kits' for both bikes, which can save you a chunk of change compared to going oem or even wemoto -  https://shop.marksman-ind.com/index.asp?function=SEARCH Re: FZ1 and FZS wheels bearings: - kralik - 07-01-21 thanks a lot for this information.  Re: FZ1 and FZS wheels bearings: - b1k3rdude - 07-01-21 Your welcome. I did this because I had some bearings and seals sitting in my cupboard for my previous FZS, so I needed to know what parts were shared between the two bikes if any.