+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Chain Case Cover (/showthread.php?tid=81577)
Chain Case Cover - WayneUK - 08-04-20
Hi all,
Just wanted to know the best way of removing the chain case cover to get to the front sprocket?
Re: Chain Case Cover - robbo - 08-04-20
You'll have to remove the gearchange linkage first, then the sprocket cover. One end of the linkage is left hand thread. Make a note of how much thread is used as you dismantle, so that the gear lever can be returned to its current position.
Re: Chain Case Cover - WayneUK - 08-04-20
(08-04-20, 10:48 AM)robbo link Wrote: You'll have to remove the gearchange linkage first, then the sprocket cover. One end of the linkage is left hand thread. Make a note of how much thread is used as you dismantle, so that the gear lever can be returned to its current position.This is the bit i wasn't sure about removing, which end is the left had thread? and what will be the best way of removing gearchange linkage?
Re: Chain Case Cover - red98 - 08-04-20
hi wayne...remove the foot rest and linkage in one piece,disconect the linkage from the gearbox end...three hex bolts hold the footrest to the frame...
Re: Chain Case Cover - WayneUK - 08-04-20
(08-04-20, 11:02 AM)red98 link Wrote: hi wayne...remove the foot rest and linkage in one piece,disconect the linkage from the gearbox end...three hex bolts hold the footrest to the frame...Hi red,
That sounds a good way, I'll give that a try , Thank you