![]() |
Newbie with speedo problems - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=65) +--- Forum: Introduction (https://foc-u.co.uk/mybb/forumdisplay.php?fid=68) +--- Thread: Newbie with speedo problems (/showthread.php?tid=76355) |
Newbie with speedo problems - Brainless - 13-08-16 Hi, I'm from Southampton and I have a 2008 gen 2 fz1s which was an import from the states. i have had the bike for 6 years and it's been brilliant we have been to loads of places in Europe. Just recently though I have had problems with the clocks switching off. After a while they come back on again. I have followed the wiring diagrams on UK bikes (can't find US version) but still can't find the cure. I am suspicious of the condition of my battery and I will probably replace this but other than that it's new clocks. If any one has any ideas or has heard of this happening I would appreciate some help. It's a cracking bike though. Re: Newbie with speedo problems - Grayo - 13-08-16 Unlikely to be the battery at fault. I would start by checking all the connections in the plugs (in the back of the clocks and where it connects to the loom) and cleaning them up. Re: Newbie with speedo problems - Brainless - 13-08-16 Thanks for your help. I have taken the clocks out of the bike and given them a good spray with contact cleaner. There are two supplies to the clocks and two earths. I reckon it's either one of the earths with a high resistance or the clock module itself. I could do with borrowing a clock and trying it out. |