+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=65)
+--- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=69)
+--- Thread: Anybody fitted SRAD forks to a 600 Fazer? (/showthread.php?tid=74457)
Anybody fitted SRAD forks to a 600 Fazer? - joebloggs - 10-12-15
Or more to the point can the stem's be swapped?
I know every man and his dog uses R1 forks but got these cheap
Answers on a postcard please
Re: Anybody fitted SRAD forks to a 600 Fazer? - Deefer666 - 10-12-15
The stems will need to be swapped... Local engineer job. I doubt the average person will be able to do it. You may need spacers as well. I only used an R1 on my FZS because as you said I got them cheap but even they are not a straight swap and require the stems swapping and a spacer under the top yoke.
Re: Anybody fitted SRAD forks to a 600 Fazer? - Punkstig - 10-12-15
If you go through with it make sure you fit the srad600's 4 pot calipers not the 750's 6 pots as they are shocking!
Re: Anybody fitted SRAD forks to a 600 Fazer? - joebloggs - 14-12-15
(10-12-15, 11:39 PM)Punkstig link Wrote: If you go through with it make sure you fit the srad600's 4 pot calipers not the 750's 6 pots as they are shocking!
Found a set of four pots and a pair of Ferodo disc's for just over £90. Need to find someone to press out/in the steering stems now
Re: Anybody fitted SRAD forks to a 600 Fazer? - joebloggs - 14-12-15
After a SRAD USD lower yoke if anyone has one kicking around