Fazer Owners Club - Unofficial
rear wheel bearings.. - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: rear wheel bearings.. (/showthread.php?tid=74379)



rear wheel bearings.. - speirsy1810 - 25-11-15

Hi.......just picking fzs1000 riders brains...i need to get new rear wheel bearings.....where is the best place to get them from...i have no problems fitting them,
ta


Re: rear wheel bearings.. - esetest - 25-11-15

I got mine from Wemoto .


Re: rear wheel bearings.. - AyJay - 25-11-15

I got a set from Markman Industrial. Or was it All Balls Racing. If forget.


If a bearing has failed, the roller caged one is a bastard to remove. It kind of welds itself into the aluminium of the wheel. Good luck!


Re: rear wheel bearings.. - unfazed - 25-11-15

The needle roller one does not normally give trouble unless the right side one is totally focced.

Replace the external right seal when replacing that bearing

Marksmans or WeMoto is where I usually get mine if I cannot get them in the local bearing shops




Re: rear wheel bearings.. - PaulSmith - 26-11-15

Marksman does the kit with everything you need. They have changed their website so it is much harder to find, but the kits you want have the codes 'YA001' for the rear wheel bearings and seals and 'YA002' for the sprocket carrier. 
http://shop.marksman-ind.com/ya001-rear-wheel-bearing-kit-fazer-fzs-1000-01-05-yzf-r1-98-01-yzf-r699-02-20-p.asp
http://shop.marksman-ind.com/ya002-fazer-fzs1000-01-05-sprocket-carrier-bearing-kit-22-p.asp




Re: rear wheel bearings.. - bowen93 - 26-11-15

i bought the kit from marksman also. good prices way cheaper than yamaha


Re: rear wheel bearings.. - speirsy1810 - 26-11-15

(25-11-15, 10:55 PM)AyJay link Wrote: I got a set from Markman Industrial. Or was it All Balls Racing. If forget.


If a bearing has failed, the roller caged one is a bastard to remove. It kind of welds itself into the aluminium of the wheel. Good luck!




i hope not...but thanks..


Re: rear wheel bearings.. - speirsy1810 - 26-11-15

thanks for all your assistance....very helpful....


Re: rear wheel bearings.. - nickodemon - 27-11-15

+1 Marksman