Gen1 carb balancing - Printable Version

Gen1 carb balancing - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Gen1 carb balancing (/showthread.php?tid=72273)

Gen1 carb balancing - Gavin - 21-04-15

Hi,
How easy is it to balance the carbs?

Re: Gen1 carb balancing - sadlonelygit - 21-04-15

once you've found the adjuster screws, really easy. :rollin

Re: Gen1 carb balancing - Gavin - 21-04-15

Where are they then?

Re: Gen1 carb balancing - unfazed - 21-04-15

(21-04-15, 05:08 PM)sadlonelygit link Wrote: once you've found the adjuster screws, really easy. :rollin

:agree :rollin

Re: Gen1 carb balancing - slappy - 21-04-15

You will need a long Philips screwdriver! After you have found all the adjuster screws it is fairly easy. I think there is a how to guide on Pats motorcycle page.http://www.cartestsoftware.com/fz1/carburetorsynchronization.html.
I used that as a guide the first time I did mine when I had a gen1

Re: Gen1 carb balancing - sadlonelygit - 21-04-15

[Image: CARBSYNC213.JPG]

except that everything will be covered in crap and wiring loom and possibly the evap system.

a good torch, some tippex and plusgas and the 300mm screwdriver will see it done.