+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=65)
+--- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=69)
+--- Thread: R&G Bar Protectors (/showthread.php?tid=65495)
R&G Bar Protectors - nsr500v4 - 13-09-13
I have a set of the datatool heated grips to fit but the bike has R&G bar end protectors, how do these come off to let me? Thought i better check before i start ripping bits off! :lol
Re: R&G Bar Protectors - Dead Eye - 13-09-13
If its on the stock bars then its just a bolt that holds the bar end and screws into a fixed "nut" inside the bar. Just undo the bolt in the centre of the bar end and it should come off with it
Re: R&G Bar Protectors - nsr500v4 - 13-09-13
I unscrewed the black nylon end and theres nowt else to unscrew! Only the hole the nylon end screws into!
Re: R&G Bar Protectors - Dead Eye - 13-09-13
Just realized you are on a Fazer 1000
Are they more like this; http://www.ebay.co.uk/itm/R-G-RACING-BAR-END-WEIGHTS-SLIDERS-YAMAHA-YZF-R125-2008-2012-/160793050303?pt=UK_Motorcycle_Parts_13&hash=item2570033cbf
If so, then the thread is part of the bar end which should just unscrew?
Re: R&G Bar Protectors - nsr500v4 - 13-09-13
AH, dead eye that makes sense, when the nylon end comes off its got 2 flats so obviously for a spanner to remove them, good man!
Re: R&G Bar Protectors - Dead Eye - 13-09-13
You're welcome
I'd done a little bit of research recently as I bought new bar ends for my Renthal bars - ended up using some Rawlplugs from B&Q to attach them
