Fazer Owners Club - Unofficial
Won't start, with loud bang's - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Won't start, with loud bang's (/showthread.php?tid=82251)

Pages: 1 2


Re: Won't start, with loud bang's - robbo - 04-03-21

(03-03-21, 08:43 PM)Jays83 link Wrote: Thank you for your advice, i've just taken the head off.
Now i'm waiting for my wife to leave the house so i can put it in the dishwasher Wink
I like your style :thumbup . Hope all goes well.


Re: Won't start, with loud bang's - SkidT - 04-03-21

(03-03-21, 08:43 PM)Jays83 link Wrote: Now i'm waiting for my wife to leave the house so i can put it in the dishwasher Wink
Excellent.  :lol  A man after my own heart.  :thumbup  Good luck with it.


Re: Won't start, with loud bang's - Jays83 - 27-03-21

Today was the day, after a couple of weeks waiting for parts it all came in last thursday. It took me two evenings to put it all back together and today i finally started it. There is only one thing that doesn't seem wright.
When the engine is running idle everything goes well butt when i rev it up a little to some 4000rpm and i close the throttle, the rpm's go down very slow. Almost like the throttle cable is stuck but it's not.
Also while riding i noticed that when i pull the clutch, the rpm's go up. I changed the idle a couple of times and that did help but after a while the same thing happened.


Before i fitted ivans full monty i did not have this problem.
Yes i've balanced the carbs an adjusted the tps.


Can anyone point me in a direction to look at.


Re: Won't start, with loud bang's - Trebus - 27-03-21

Sounds like an air leak somewhere.


Re: Won't start, with loud bang's - Jays83 - 28-03-21

Thank's, i'll spray some brake cleaner on the inlet rubbers to check if somethings sucking up false air.


Re: Won't start, with loud bang's - Jays83 - 28-03-21

Can it be that there is something blocking the holes i drilled when fitting ivan's jetkit?