rubbers

[coke66]

Hi all, back again !!!!!!!!
Help needed in finding rubbers, not that type, the ones that fit between the carbs and the head, sounds worse as go on lol
any help would be appreciated
All the best and starting to fit in with the mad-house

[andybesy]

Best bet is keep an eye (or a saved search) on ebay.

A quick initial search found these:

http://www.ebay.co.uk/itm/YAMAHA-FZS-600-FAZER-5DM-INLET-MANIFOLD-RUBBERS-CLAMPS-/231007903899

Andy

[coke66]

thanks alot 

[unfazed]

I was going to recommend a Chemist but then read your post again  

[Punkstig]

Yeah, they ain't cheap really!
http://www.ebay.co.uk/itm/Yamaha-FZS600-Fazer-98-02-Carburettor-To-Head-Rubbers-Carb-Inlet-Rubbers-/130940850602?pt=UK_Motorcycle_Parts_13&hash=item1e7caed1aa

[darrsi]

Yeah, they ain't cheap really!
http://www.ebay.co.uk/itm/Yamaha-FZS600-Fazer-98-02-Carburettor-To-Head-Rubbers-Carb-Inlet-Rubbers-/130940850602?pt=UK_Motorcycle_Parts_13&hash=item1e7caed1aa

Your one's are a snip of a price in comparison.....


http://www.yamahamotorcyclespares.co.uk/spares/epc2.asp?modelID=9657&PageiD=10&m=YAMAHA+FZS600SP+Fazer+INTAKE&uID=

[Blisteredfingerz]

Hi there.


Thought I needed some for a while as mine are cracking but was told to idle the bike and spray a bit of WD40 over the carb rubbers and if the revs increased then this indicates that they are split through.


Also when I had my bike MOT a month ago I mentioned to the tester about the cracking on the rubbers and he said they can look cracked and splitting on the outside for years before they split through.


These are the cheapest I could find;

http://www.wemoto.com/bikes/yamaha/fzs_600_fazer/98-99/picture/carburettor_to_engine_inlet_rubbers/

[darrsi]

Hi there.


Thought I needed some for a while as mine are cracking but was told to idle the bike and spray a bit of WD40 over the carb rubbers and if the revs increased then this indicates that they are split through.


Also when I had my bike MOT a month ago I mentioned to the tester about the cracking on the rubbers and he said they can look cracked and splitting on the outside for years before they split through.


These are the cheapest I could find;

http://www.wemoto.com/bikes/yamaha/fzs_600_fazer/98-99/picture/carburettor_to_engine_inlet_rubbers/

Punkstig's were £77.45