Date: 06-11-25  Time: 22:11 pm

Author Topic: Oh shite....  (Read 5657 times)

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Oh shite....
« on: 03 April 2013, 08:49:05 pm »
Just went for a spin on my cousins bike for the last time before I have to bring it back on Friday and the exhaust fell off about a mile from home, just split at the joint under the peg, had to pull it forward and onto the peg and hold it with my foot against the peg so no rear brake the rest of the way home, now I'm panicking. The end of the exhaust looks like it completely rusted and doesn't look like there's any exhaust left to clamp the down pipe from the slip on onto the exhaust. Any ideas?

Dead Eye

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 3,753
Re: Oh shite....
« Reply #1 on: 03 April 2013, 09:12:02 pm »
Aftermarket or stock exhaust? By the looks of the photo its the link pipe that has gone - if so I would guess it just needs to be replaced which is easy enough if its aftermarket as the cans are typically separate. If it's a stock exhaust then the whole can needs to be replaced as its sealed on to the link pipe I believe.

If on the other hand its snapped off from the downpipes then... I don't know. They aren't the cheapest things to replace unfortunately :(

Chris

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 1,982
Re: Oh shite....
« Reply #2 on: 03 April 2013, 09:20:47 pm »
Looks to me like the part of the downpipes that goes inside the link pipe.. Don't know about fixing it without replacing the downpipes though...
 
Not your fault though buddy, it could have happened any time. Sorry I know that's not much help...
 
Give your cousin a ring and let him know what's happened, I'm sure if you're straight with him then albeit a pain in the ass it's noones fault and it's not like you crashed the bike or something.
 
Chris

red98

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 6,567
Re: Oh shite....
« Reply #3 on: 03 April 2013, 09:22:44 pm »
could it be welded ?  ;)

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #4 on: 03 April 2013, 09:51:17 pm »
I'm not sure, it's the stock down pipes and from there back I think it's aftermarket, it may just be the link pipe, if that's all it's not so bad, I told him, he sounds very pissed of but like was said it wasn't my fault, driving on straight smooth road and just came apart. Never touch exhaust before this, just unfortunate.

Chris

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 1,982
Re: Oh shite....
« Reply #5 on: 03 April 2013, 10:06:31 pm »
That's a shame mate, sure it'll get fixed somehow. I'm sure he's just pissed off because the bike is broken not with you so no need to worry.
 
Chris

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #6 on: 03 April 2013, 10:18:50 pm »
Ok it definatly looks like the gasket is gone. :'(

taylor

  • GP Hero
  • ******
  • Posts: 1,521
Re: Oh shite....
« Reply #7 on: 03 April 2013, 10:54:07 pm »
put a piece of smaller pipe inside, add a bit of exhuast putty, then hand back the keys job done . 8)

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #8 on: 04 April 2013, 11:39:23 am »
Ok it definatly looks like the gasket is gone. :'(

I have a brand new exhaust gasket. I'll sell it half price (€8) plus whatever standard post is. Probably easier to send it by that courier for a €6. Let me know if you want it.

Can't tell from your photo, but the if the link pipe sheared/rotted, maybe you can get a sleeve welded over both pipes.

As for your Cousin....That is a quite normal reaction from your cousin which is why I avoid borrowing bikes and loaning bikes myself....too much at stake like property, money, friendship ect.

But when an owner do allows you to use his bike, then he should already have accepted in his heart and in his pocket (and not just from a fleeting thought in his head), that his bike could be robbed, damaged, returned in an unsatisfactory condition, or written off while in the borrower's possession....and without the possibility of a favourable outcome for the owner. If you are really not willing to accept that....then don't loan.


I am blessed to have two bikes, but I wouldn't allow anyone a loan of one of them no matter how desperate they are. I loaned a bike to a good friend of mine to go to a rally a few years ago. He was desperate to go to this rally with his club. I played the Good Samaritan and even went to the trouble of actually having the bike all spick and span for him for the rally.

When he returned the bike after the weekend, it resembled a motorcross bike that did about 12 hours of non-stop scrambling with all the muck on it. He also managed to damage to fuel filler cap...no problem there, shit happens. But he drove the bike 180 miles home with filler cap open, spewing petrol all over my tank. He wouldn't pay €5 for a universal cap in a garage....sheez!!

Needless to say it left a sour taste in my mouth and in our friendship for a while. But I have to take some of the blame for loaning the bike, and for foolishly placing expectations on other humans which they may fail to live up to.

Just count yourself lucky that your damage is quite fixable. Imagine if the motor blew??.....how would your finances and your relationship with your cousin hold up then???

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #9 on: 04 April 2013, 12:24:06 pm »
That's very true, but I didn't even ask for his bike, he asked me to ride it for him in the parades and then said he didn't want it back until it was sunny so I kept it because it was pissing rain at the end of the second parade and I said I'm going home, got bit wet but no matter. But when I brought the bike from his house the lights just went off half a mile up the road. So I get the blame for that, and when I fix the lights the exhaust just falls of all by itself and he gets thick, I'd swear I kicked it until it fell of, I cleaned a half an inch of shit of his chain( no joke, I measured it!!!!) and he said he thought the bike was 100% before he gave it to me. Me bolox, the kickstand was fucked so I fixed it, but the kickstand switch hasn't worked since I got it but I'm sure ill get the blame for that, but otherwise in cleanliness he is getting it back sparkling compared with the way I found it.

As for the exhaust I was looking at it and don't think the gasket will work, think its a aftermarket slip on job, just the end of the manifold has rotted away a good bit, I guess it good it happend to me in a way cause he is a f**king egit on it, and if it came off and him doing 110 and over could do some serious damage

JoeRock

  • Naughty Corner
  • WSB Pack Hound
  • *****
  • Posts: 907
Re: Oh shite....
« Reply #10 on: 04 April 2013, 03:29:56 pm »
To be honest I'd probably give it back to him and tell him to f*ck off, if someone's bike fell apart whilst I was riding it I'd be livid.
he does sound s bit of a muppet from what you're saying though, has no idea how to look after a bike and still rides it like a nobber?

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #11 on: 04 April 2013, 04:05:07 pm »
To be honest I'd probably give it back to him and tell him to f*ck off, if someone's bike fell apart whilst I was riding it I'd be livid.
he does sound s bit of a muppet from what you're saying though, has no idea how to look after a bike and still rides it like a nobber?

I know the story why you ended up with the bike, but I would have told him to sod off in riding it in the parade in the first place. That is my point. What if you had an accident at the parade?? What if the engine just happened to blow up in the parade??

Sorry my man, but even after the parade you still choose to ride it despite knowing you were on a dodgy sort of bike. First the modified lights went on the bike while riding it. Thank God it didn't happen turning into a bend dead at night or you could have been killed. Then you posted here about the handling was like a sausage and (i think) that the guy had only half the tire pressure in his tyres. How many wake up calls do you actually need!!! 

Also, while he wanted you to ride it until the good weather, he didn't twist your arm or put a gun to your head. You had a choice, my friend. That is what would be said if anything legal came out of this if something more serious happened.

Rather than taking Joe's approach to tell him to sod off and risk ruining a friendship, I would ask him to meet you at least half way on the cost and let him know that you are not happy either about the incident. He also has to be practical and realise that it didn't rot away since March 17th. This happened over a few years in which he was mostly riding it. But this is the sort of thing that can get messy. Live and learn, dude!!

btw....why aren't you riding yer own one?....is it still off the road?

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #12 on: 05 April 2013, 08:07:06 am »
He really hasn't any clue about looking after them, he said he thought bike was 100% when he gave it too me, oh never again, mistake well learned. Going to fix exhaust this morning, not a clean break but it is a break after all, now have to go get the bloody thing welded

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #13 on: 05 April 2013, 08:48:33 am »
Well give the bike back ASAP, dude. The exhaust fiasco was just another sign for you to do that.

Also, that metal looks very thin and exhausted. I had similiar type of problems on one of my old pipes and from my experience is that it will go again which i'm sure your welder will tell you also. So warn him of the possibility so he can keep an eye on it if he chooses. Also, don't be a bit surprised if it can't be welded at all. The metal is so thin that the welder might keep blowing holes through it in trying to fix it. Best of luck, anyway.

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #14 on: 05 April 2013, 10:15:44 am »
Thanks dude, gona need luck with this, it is very thin indeed, might just have to cut it of and weld a short new bit of pipe in its place, hope its easy job, don't want handing out a fortune for something that wasn't my fault. Also packie yes my own bike is flying, apart from the little splutter from 1k to 5k( which I have yet to investigate) (maybe new plug caps) it's running sweet, just Ur man has his street fightered ( horrible in my opinion.  And he wanted to show it of on the parade, that's all, otherwise I would have brought mine. (Would have been more reliable

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #15 on: 05 April 2013, 12:27:43 pm »
Thanks dude, gona need luck with this, it is very thin indeed, might just have to cut it of and weld a short new bit of pipe in its place, hope its easy job, don't want handing out a fortune for something that wasn't my fault. Also packie yes my own bike is flying, apart from the little splutter from 1k to 5k( which I have yet to investigate) (maybe new plug caps) it's running sweet, just Ur man has his street fightered ( horrible in my opinion.  And he wanted to show it of on the parade, that's all, otherwise I would have brought mine. (Would have been more reliable

Personally, I have to agree. The streetfighter look on that bike is horrible. Actually, I wouldn't even call it a streetfighter. Ditching a fairing and putting a set of twin headlights in NOT a streetfighter....it's what it is....just a bike that someone turned from a faired bike to a semi-naked one.

If you are going to do a streetfighter....you REALLY need to just do it and not do a half baked effort. The lights work as a starting point, but I would have taken a big leap and ditched the clocks for something else...they look gammy stuck up there with that half baked bikini fairing. I would have gone for a one off hand made "feck off" stainless pipe with a one off wild paint paint job just for starters too....then it would be on the way on becoming in some way a REAL streetfighter.

But if I was doing a jobby on an old model fazer, I wouldn't go the streetfigher look at all. I just would have picked up a foxeye cone which looks real aggressive and angry and I would have modified that onto the old model bike and got a wild agressive paint job to suit, and then got a stubby type can and taken it from there.

Anyway man....your bike is YOUR pride and joy, so that is the bike you should be riding in the parade....not his. If he wants to show off his half baked effort....then he should have rode it himself. So there is a goal to set yourself now....to ride your own bike next year and to get it tidied up and spotless for the parade instead of putting your hard earned cash into someone elses bike!!

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #16 on: 05 April 2013, 01:42:49 pm »
Got it fixed now, 55 quid out of pocket but I made Ur man put 65 on the receipt, fuck it, good job though, definatly get my own tidied up for next year. He also fixed carrier bracket, that's what caused the break, exhaust was rotten and with the loose end can it just shook it until it snapped

darrsi

  • GP Hero
  • ******
  • Posts: 10,671
Re: Oh shite....
« Reply #17 on: 05 April 2013, 01:55:20 pm »
You know what you need over there..........M.O.T's
They can be a pain sometimes but they do tend to keep you on your toes with looking after your bike, and it's for your own benefit in reality.
I wouldn't have gone near a bike with an exhaust flapping about to be honest, although i doubt i'd have got very far in London without being nicked anyway  :stop

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #18 on: 05 April 2013, 07:11:00 pm »
You know what you need over there..........M.O.T's
They can be a pain sometimes but they do tend to keep you on your toes with looking after your bike, and it's for your own benefit in reality.


Bollocks to that....I'm well capable and responsible at looking after my bike. It's only another scam to make money for the government in the long run.


Ha ha...It would be a joke over here if they were so worried that our machines are safe and sound for our own benefit, yet they leave our roads in a chronic and trecherous condition with potholes all over the place. Don't even start. If they are so worried about our safety, then it be more in their line to fix our freakin roads and potholes first.


On top of that, any cop over here can pull you in and do you for lights, exhausts, small number plates ect ect along with a host of other things...so what's the point? You still need to make sure your bike is in some way in order, anyway. 

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #19 on: 05 April 2013, 07:12:58 pm »
Tidy job Padraig and the price wasn't too bad. Hope your cuz isn't watching in or your scam will be blown!!


But it was money that cud have gone into yer own bike, so learn from it, dude!

darrsi

  • GP Hero
  • ******
  • Posts: 10,671
Re: Oh shite....
« Reply #20 on: 05 April 2013, 07:59:58 pm »
"..... You still need to make sure your bike is in some way in order, anyway....."


Like the above you mean?  :rolleyes 


Having parts falling off your bike is the kind of thing you expect to see on Laurel & Hardy!  :)


dBfazer600

  • WSB Pack Hound
  • *****
  • Posts: 575
Re: Oh shite....
« Reply #21 on: 05 April 2013, 09:00:37 pm »
Your giving him a new bike back. I understand what has been said but honestly I would have just gave him the keys back. Its a good fix and I salute your character.
 
Daz

reillypadraig

  • Club Racer
  • ****
  • Posts: 251
Re: Oh shite....
« Reply #22 on: 06 April 2013, 12:48:06 am »
Wel it could have gone a lot worse, I explained the whole thing to him and I said could have fallen of when he was riding in a group like he usually does and fell off and could have caused 5 or 6 other guys behind him to have an accident.
He accepted and is willing to pay the amount I told him with no problems, after that he said he would pay whatever I spent on the bike, I said no, just the exhaust, fixing the rest of the bike was just out of kindness really and abit more experience under the belt,
And like packie said I now have the knowledge never to borrow or loan a bike in the future.

It was a tidy job in the end, it was the end can that caused the problem, the bracket was too loose and was shaking the pipe the whole time, and it just shook the rotten pipe until it split, so word of warning to ya guys, tighten that bracket!!!

Although one thing he didn't like was the fact I told him the whole down pipe will have to be replaced soon and it's rusted all over and only a matter of time

packie

  • Club Racer
  • ****
  • Posts: 357
Re: Oh shite....
« Reply #23 on: 06 April 2013, 02:44:43 am »
"..... You still need to make sure your bike is in some way in order, anyway....."


Like the above you mean?  :rolleyes 


Having parts falling off your bike is the kind of thing you expect to see on Laurel & Hardy!  :)


Think again about what you are saying, dude.....


There are lots of threads on this forum in which exhausts went kaput. So they were not anticipated nor prevented by the prior MOT before the failure.


Your subframe could collapse without any outer visible signs tomorrow and no MOT or regular inspection on your behalf might detect or prevent it. Your wheel could collapse without any outer visible signs too. Your linkages to your suspension could collapse without any warning signs just like it did on Cop Bikes (FJR1300s) over here which I heard that they stopped using now.


If you had the same exhaust as on Padraig's cousins bike, your exhaust could collapse too like Padraigs without any visible outward signs or warning. It could just rot from the inside out and get so wafer-like thin (but still not showing any holes or wear signs from the outside), that it just snaps off at a certain breaking point from vibration. So MOTs nor your vigilance can always prevent Laurel & Hardy shit from just happening.








darrsi

  • GP Hero
  • ******
  • Posts: 10,671
Re: Oh shite....
« Reply #24 on: 06 April 2013, 08:19:18 am »
"..... You still need to make sure your bike is in some way in order, anyway....."


Like the above you mean?  :rolleyes 


Having parts falling off your bike is the kind of thing you expect to see on Laurel & Hardy!  :)


Think again about what you are saying, dude.....


There are lots of threads on this forum in which exhausts went kaput. So they were not anticipated nor prevented by the prior MOT before the failure.


Your subframe could collapse without any outer visible signs tomorrow and no MOT or regular inspection on your behalf might detect or prevent it. Your wheel could collapse without any outer visible signs too. Your linkages to your suspension could collapse without any warning signs just like it did on Cop Bikes (FJR1300s) over here which I heard that they stopped using now.


If you had the same exhaust as on Padraig's cousins bike, your exhaust could collapse too like Padraigs without any visible outward signs or warning. It could just rot from the inside out and get so wafer-like thin (but still not showing any holes or wear signs from the outside), that it just snaps off at a certain breaking point from vibration. So MOTs nor your vigilance can always prevent Laurel & Hardy shit from just happening.


"....exhaust was rotten and with the loose end can it just shook it until it snapped...."


Kind of speaks volumes doesn't it!
And judging by the way you, me, and others on here for that matter, actually pamper our bikes a bit, you can't tell me that you wouldn't have had a quick look around the bike and probably condemned it and not ridden it? Or just have an urge to immediately point out what you thought needed improving.
Even Padraig has stated he kindly fixed loads of things while he had it.
What i'm saying is if Padraig thought things needed sorting then the bike would've failed an MOT with flying colours.
Add to the fact that if you were riding/driving or walking near the bike and an exhaust suddenly came your way i'd imagine you'd be just a little bit pissed off too, 'cos i know that i would!
I understand your point about not giving the government more money, that's natural, but i personally reckon having MOT's is a good thing for every road user.
As for bad roads, well you're not alone there i'm afraid, the road that leads to my work for instance looks like a patchwork quilt, which has different potholes appearing every day that still catch me out, even though they seem to make bad repairs on a regular basis.