Author Topic: what did you do with your fazer today ? (Read 1699086 times)

Skippernick · « **Reply #2825 on:** 01 June 2014, 08:39:12 pm »

Lead my first WABAM IAM group ride.

dazza · « **Reply #2826 on:** 01 June 2014, 08:48:21 pm »

Cheers Brooker, couldn't work out why they were fouling the centre stand at first but then noticed I'd lost the rubber stop that hits the link pipe. All sorted now and yes, there's a place that powder coats just down the road from me, think the rear hangers need doing too.

chaz · « **Reply #2827 on:** 01 June 2014, 10:02:11 pm »

took it to bits?

Andy FZS · « **Reply #2828 on:** 01 June 2014, 11:03:32 pm »

Went to Helmsley for a cup of tea with my lad this afternoon, set off at 4ish and home for 7pm roads were perfect.

dBfazer600 · « **Reply #2829 on:** 02 June 2014, 12:09:29 am »

Prep for Germany.

Brakes cleaned and inspected, greased or lubed all parts that need, unblocked scottoiler, fit autocom and generally relaxed with the bike.

Daz

andybesy · « **Reply #2830 on:** 02 June 2014, 03:37:54 pm »

Passed MOT, no advisories! yay. always a nervous time.

Andy

Dave48 · « **Reply #2831 on:** 02 June 2014, 04:19:06 pm »

Washed/cleaned bike after weekend riding round mid-Wales in bright sunshine/stunning scenery/ace roads!

stevierst · « **Reply #2832 on:** 02 June 2014, 04:59:07 pm »

Took my daughter out for a ride to glasson dock also with a work buddy.
Got home to find my shiny new knee sliders sat there just delivered, so went out again to try and 'bed them in'.
30 miles of roundabouts later...............
Can I get them down, can I buggery! Peg blobs took a hammering, tyre edge gone, but no slider contact. Gotta keep trying;D

bri h · « **Reply #2833 on:** 02 June 2014, 05:04:38 pm »

Fitted new sp Engineering end can. Imho looks and sounds great even with the baffle in.

noggythenog · « **Reply #2834 on:** 02 June 2014, 05:14:20 pm »

Quote from: bri h on 02 June 2014, 05:04:38 pm

Fitted new sp Engineering end can. Imho looks and sounds great even with the baffle in.

Come on Bri...you know the drill

woodwizzard · « **Reply #2835 on:** 02 June 2014, 06:43:18 pm »

Rode it for the first time, ok, it was only 1.5 miles to the garage fot mot tomorrow and peeing down, but I already know I'm gonna love it

Ordered oil and filter and a set of more normal sized indicators to fit on, don't like mini ones.

imax · « **Reply #2836 on:** 03 June 2014, 11:32:33 am »

Took it for its MOT (passed

) then spent 15 minutes trying to figure out where this spring had come from that appeared in my top box

Details

Then I found the rest of the broken pen in the document holder.

atp600 · « **Reply #2837 on:** 03 June 2014, 12:16:56 pm »

Used a Kiddies paintbrush set to fill in the paint chips on my engine. Couldn't find a decent aerosol !

Exupnut · « **Reply #2838 on:** 03 June 2014, 12:59:55 pm »

Taxed it. Mot due next munf.

noggythenog · « **Reply #2839 on:** 03 June 2014, 02:04:13 pm »

Quote from: Exupnut on 03 June 2014, 12:59:55 pm

Taxed it. Mot due next munf.

I foresee an instant fail.............Too Blue

Rexr · « **Reply #2840 on:** 03 June 2014, 02:36:43 pm »

Just ordered some billet levers and a Mivv exhaust......

Exupnut · « **Reply #2841 on:** 03 June 2014, 02:38:16 pm »

Quote from: noggythenog on 03 June 2014, 02:04:13 pm

Quote from: Exupnut on 03 June 2014, 12:59:55 pm
Taxed it. Mot due next munf.

I foresee an instant fail.............Too Blue

I do love a bit of jealousy.... You'll get there Fraser .. X .... Meantime this just for u...

karlo · « **Reply #2842 on:** 03 June 2014, 04:18:24 pm »

Quote from: Exupnut on 03 June 2014, 02:38:16 pm

Quote from: noggythenog on 03 June 2014, 02:04:13 pm
Quote from: Exupnut on 03 June 2014, 12:59:55 pm
Taxed it. Mot due next munf.

I foresee an instant fail.............Too Blue

I do love a bit of jealousy.... You'll get there Fraser .. X .... Meantime this just for u...

woodwizzard · « **Reply #2843 on:** 03 June 2014, 05:21:25 pm »

Straight through mot, no issues. Happy days

Dead Eye · « **Reply #2844 on:** 03 June 2014, 05:45:49 pm »

Made the final credit card payment to pay off the purchase of my thou

Now I need to start work on the other credit card...

chaz · « **Reply #2845 on:** 03 June 2014, 06:40:55 pm »

new boots

Red Ceri · « **Reply #2846 on:** 04 June 2014, 08:45:51 am »

Ripped the META alerm of my bike and bypassed it using a paper clip, couldn't get any wires securley into the connectors, started first time,

Only to find where I've sited my scottoiler is directly above the area where the alarm was spliced into the main loom and overtime any oil leaks (during filing) has dripped onto the area and all the loom tape has come adrift in the area and may be causing my cutting out issue. Need to clean the area and re-tape all the single connections and loom.

Any ideas of best cleaning fluid to remove the oil residue without causing more long term problems? I was actually thinking of using Brake and clutch cleaner (quick flash off time and fairly heavy duty).

TonyW · « **Reply #2847 on:** 05 June 2014, 01:50:55 am »

Had a gentle run out to Paignton bike night. Spotted a couple of Fazers, Had a cuppa then a rather more exciting ride home with a couple of mates I met there.

stevierst · « **Reply #2848 on:** 05 June 2014, 05:52:50 am »

Quote from: Red Ceri on 04 June 2014, 08:45:51 am

Any ideas of best cleaning fluid to remove the oil residue without causing more long term problems?

You could give brake cleaner a go and see what happens. Also try a little engine degreaser on a cloth, that'll get rid of the oil.
A bit of petrol or nail polish remover on a cloth with definately get rid of the sticky tape residue.

Dave48 · « **Reply #2849 on:** 05 June 2014, 09:43:46 am »

Quote from: stevierst on 05 June 2014, 05:52:50 am

Quote from: Red Ceri on 04 June 2014, 08:45:51 am
Any ideas of best cleaning fluid to remove the oil residue without causing more long term problems?
You could give brake cleaner a go and see what happens. Also try a little engine degreaser on a cloth, that'll get rid of the oil.
A bit of petrol or nail polish remover on a cloth with definately get rid of the sticky tape residue.

GT85has a light solvent action on glue residues & wont harm your electrics.