front brake mc res top screws? seized/rounded?

[Robfzs]

going to do the brakes soon,but the screws are pretty chewed up so need to replace them,what sizes are they ? and where could i get a pair from?

thanks

[dickturpin]

Not sure of the size but plenty of stainless on fleabay.

[red98]

screw fix might be able to help....i would of thought m4 or m5...be careful with the length swop like for like 

[donkey93]

i think they are m4

[topgun44]

i have to buy two myself when to yamaha bike shop 1.37 each 

[subby]

Is it possible the fazer 1000 ones are the same?. I see stainless listed for the thou but not for the 600.

[dickturpin]

http://www.ebay.co.uk/itm/GENUINE-YAMAHA-FZS600-FAZER-FRONT-MASTER-CYLINDER-CAP-SCREWS-X2-NOS-/120845449620?pt=UK_Motorcycle_Parts&hash=item1c22f33994

[solorider]

Is it possible the fazer 1000 ones are the same?. I see stainless listed for the thou but not for the 600.

yes they are the same,they fit most yamahas

[wraith600]

as been said there is allways ebay


http://stores.ebay.co.uk/Aruncas/M4-/_i.html?_fsub=9054094&_sid=51002681&_trksid=p4634.c0.m322


just got some bits from these nice n quick delivery

[Robfzs]

well got the screws a while back but been waiting for the new lines to come

had a go at getting the original screws out with my impact driver but they just bored out the screw lol,any ideas how to get them out ?

[His Dudeness]

had this happen once and i drilled just the head off the screw and took the cover off. then the shaft of the screw just turned out by hand with the head gone

[limax2]

  Done the same. Not difficult as the depression left in the head centres the drill. Obviously stop drilling as soon as the head breaks loose.

[Robfzs]

great..

drill the head off one and it winds out easily enough

drill the head off the other and it snaps flush 

any ideas? how to get it out?

thanks

[His Dudeness]

sometimes if you get a flat head screw driver thats smaller than the shaft of the screw and press down on hard on the screw you can turn it out. if that doesnt work then you might have to use something like an easy out.

[Robfzs]

the screw just doesn't wanna budge and tried drilling it out but seems it wants to go in to the ali instead of taking the bolt out

anyone got a spare working mc?

[Robfzs]

ordered a replacement mc seeing as its only 20 odd quid

Brake fluid was golden when i drained it out D:

[Jamieg285]

I've got a seized MC bolt on my new Fazer.  Thanks for the info here, it doesn't look like too bad a job, and I know what screws to get.


Thanks.