Author Topic: Centre stand or not? (Read 2283 times)

deeteefifty · « **on:** 02 September 2018, 07:32:25 pm »

One of the last jobs I want to sort out on my recently bought Fazer 600 is the lack of centre stand, but before doing a search I found the mounting lugs have been chopped off. The repair will need some bracketry welding on from an uncomfortable position or possibly the bike part stripped/drained then dropped on it's side.
Question is, is it worth it? I've managed over the years with only sidestands, jacks or paddock stands in the shed. Or in your experience is there some peculiarities about these bikes where I'll wish or find I need one.

mtread · « **Reply #1 on:** 02 September 2018, 07:49:06 pm »

No, nothing special. I'd just make do with a side stand and use a paddock stand when necessary. Wonder why they were chopped off?

deeteefifty · « **Reply #2 on:** 02 September 2018, 08:22:42 pm »

Thanks mtread. I'm guessing the attack took place because of fancy pipes, seized hinge bolts or a desire for lightness.

Artherjob · « **Reply #3 on:** 02 September 2018, 09:40:04 pm »

I've recently got a Fazer with after market pipes and the centre stand was touching the pipes when raised. Bit of a tweek sorted it out. Seems a bit unnecessary to cut the lugs off.

deeteefifty · « **Reply #4 on:** 02 September 2018, 09:51:45 pm »

Thanks Artherjob, it's all part of the mystery of old bikes, like what were those disconnected wires for🤔😀

Bretty · « **Reply #5 on:** 02 September 2018, 10:17:24 pm »

I just swapped the centre stand on mine. I just took the tank off and layed the bike down on a cushion (old sofa seat). No need to drain anything.

It is a bit off a ballache to get to.

I do use my centre stand a lot. To spin the back wheel when lubing the chain amd to check the oil level.

deeteefifty · « **Reply #6 on:** 02 September 2018, 10:32:09 pm »

Thanks bretty, I wish it was as easy as just fitting one back on, but there's nothing to fit one to😀

darrsi · « **Reply #7 on:** 03 September 2018, 06:30:02 am »

Quote from: deeteefifty on 02 September 2018, 10:32:09 pm

Thanks bretty, I wish it was as easy as just fitting one back on, but there's nothing to fit one to😀
[/quote

Still don't know why it does that?

darrsi · « **Reply #8 on:** 03 September 2018, 06:40:23 am »

Quote from: Artherjob on 02 September 2018, 09:40:04 pm

I've recently got a Fazer with after market pipes and the centre stand was touching the pipes when raised. Bit of a tweek sorted it out. Seems a bit unnecessary to cut the lugs off.

My aftermarket exhaust has a metal plate coming off it so that the centre stand deliberately rests on it with a rubber bung.
Like Bretty i use my centre stand all the time when working on the bike, and i would most certainly be a bit lost without it being there.
I'm fortunate to have access to an air line at work to check the tyre pressures, so even simple jobs like that mean i can quickly spin the wheels into position to pump the tyres up while the bike's on the centre stand, especially as sometimes they're loading a lorry next to me so i need to be done and out of their way as quickly as possible.

fazersharp · « **Reply #9 on:** 03 September 2018, 10:45:51 am »

Quote from: darrsi on 03 September 2018, 06:40:23 am

Quote from: Artherjob on 02 September 2018, 09:40:04 pm
I've recently got a Fazer with after market pipes and the centre stand was touching the pipes when raised. Bit of a tweek sorted it out. Seems a bit unnecessary to cut the lugs off.

My aftermarket exhaust has a metal plate coming off it so that the centre stand deliberately rests on it with a rubber bung.

Thats exactly how the oem one works, or rather the other way around as the bung is on the stand,(or is that what you were saying ? picture is my repair job on it.
Deeteefifty/ if it helps I have posted my stand referb here http://foc-u.co.uk/index.php/topic,20049.msg231855.html#msg231855 with pictures of the lugs

deeteefifty · « **Reply #10 on:** 03 September 2018, 12:43:05 pm »

Thanks chaps. Fazersharp that's a good overhaul you've done, the photos will help me to work with what I have left. 1st I need a stand then I'll add it onto the winter to do list👍. I've tried uploading a photo but it must be deemed too disgusting to be deemed acceptable..

fazersharp · « **Reply #11 on:** 03 September 2018, 02:06:25 pm »

Gotta say though that despite my best efforts - with the pictures to prove it that it is starting to rust

-Remember I do not commute and only ride in the dry. Next time if I can be bothered to do it again I will get it powder coated properly.

daviee · « **Reply #12 on:** 03 September 2018, 03:18:38 pm »

buy an abba stand best stand out look them up

Bretty · « **Reply #13 on:** 03 September 2018, 04:42:02 pm »

Mamma mia! An abba stand? Sounds like a super trouper! Knowing you and knowing me, are you sure you want to take a chance?

mtread · « **Reply #14 on:** 03 September 2018, 04:52:54 pm »

My my, here we go again!

Bretty · « **Reply #15 on:** 03 September 2018, 05:07:21 pm »

I guess it comes down to money money money.

Dynspud · « **Reply #16 on:** 03 September 2018, 05:26:42 pm »

Lots of Fernan - Dough!!

deeteefifty · « **Reply #17 on:** 03 September 2018, 05:42:43 pm »

Gimme, gimme, gimme a stand before midnight.
I'll get me coat.

midden · « **Reply #18 on:** 07 September 2018, 04:05:51 pm »

Quote from: mtread on 02 September 2018, 07:49:06 pm

Wonder why they were chopped off?

Previous owner was a tit perhaps

deeteefifty · « **Reply #19 on:** 07 September 2018, 07:51:36 pm »

Yes midden one of 11🤔

darrsi · « **Reply #20 on:** 08 September 2018, 06:20:16 am »

Quote from: deeteefifty on 07 September 2018, 07:51:36 pm

Yes midden one of 11🤔

Are we still on bikes, or the England football team?

deeteefifty · « **Reply #21 on:** 08 September 2018, 06:41:46 am »

Red card

deeteefifty · « **Reply #22 on:** 08 September 2018, 09:17:36 am »

The work of a nincompoop

fazersharp · « **Reply #23 on:** 08 September 2018, 10:43:30 am »

Here is a picture from my refurb which is a good comparison to what has been cut off. I can almost understand removing the stand for a few reasons but to cut the lugs off is a step too far IMO

deeteefifty · « **Reply #24 on:** 08 September 2018, 02:10:56 pm »

Maybe they got tired of it snagging on the rocks doing trials.
Thanks fazersharp, remarkably similar photo angles there. No doubt I'll be pestering people for dimensions in the near future.

Author Topic: Centre stand or not? (Read 2283 times)

daviee