Just swapped on some new EPC clutch plates and heavy duty springs; soaked plates for an hour, refitted all plates as original, judder spring on 2nd plate, pressure plate in the single position where it sits flush, torques all up as per Haynes book (8Nm spring bolts), put everything back together, fresh oil (Castrol Power1 bike oil, 10w40 semi), adjusted clutch cable at sprocket cover and lever, just a spot of free play at lever. But now I'm having a lot of trouble with the clutch action:
The clutch lever is really stiff, really hard to pull all the way in.
When I engage 1st, the bike starts to pull forward immediately before I've let any clutch out, I have to hold the front brake to keep it stationary.
When I pull the lever all the way back, I still can't get it into neutral again, I have to hit the kill switch.
I've been trying to adjust the cable cable/lever this way and that, but still can't improve matters.
Help! What have I done wrong?!