Date: 07-11-25  Time: 10:00 am

Author Topic: FZ1 Gen 2 - Chinese radiator experience?  (Read 2267 times)

FZ1obp

  • DAS Born Again
  • **
  • Posts: 58
FZ1 Gen 2 - Chinese radiator experience?
« on: 13 April 2016, 08:55:39 pm »
My 2009 FZ1 has had an on going radiator leak that I've tried to ignore - mainly caused by riding through the winter and rotting out the bottom of the matrix. I've bodged the leak with a 2 pack sealer and it's partially stopped the leak..... but now it's getting warmer I think the leak is going to spread.

I posted a question before on what to do and the answers are approx.:
Buy Yam original from UK
Buy Yam original from USA (better price and exchange rate)
Buy Chinese one from Ebay - £100. BUT has anyone fitted one yet? They all seem to come from the same manufacturers (just different sellers). Was thinking if it lasted a couple of years then it's fine? Does it fit ok including the fans etc?

Any thoughts - many thanks

tex

  • Naughty Corner
  • WSB Pack Hound
  • *****
  • Posts: 716
Re: FZ1 Gen 2 - Chinese radiator experience?
« Reply #1 on: 13 April 2016, 09:28:27 pm »
Look for a good second hand one , ebay!

bludclot

  • WSB Pack Hound
  • *****
  • Posts: 539
Re: FZ1 Gen 2 - Chinese radiator experience?
« Reply #2 on: 14 April 2016, 06:14:56 am »


I bought a Chinese radiator for the CB400 that I am restoring - and it didn't fit. Too wide to take the original surround by quite some distance. It was cheap however, but no use to me. If that's any help?

FZ1obp

  • DAS Born Again
  • **
  • Posts: 58
Re: FZ1 Gen 2 - Chinese radiator experience?
« Reply #3 on: 14 April 2016, 01:40:15 pm »
Guys - thx for this - had another look on ebay and there was a new OEM for £250 so have bought it!
Hopefully should fit ok and maybe better quality than the Chinese ones unless they are all made in the same factory........

Nath

  • Weekend Warrior
  • ***
  • Posts: 117
Re: FZ1 Gen 2 - Chinese radiator experience?
« Reply #4 on: 14 April 2016, 07:48:13 pm »
Wow, I hope I don't have to replace one at that price! Good shout getting an OEM. All the Chinese stuff I've ordered has either been impossible to fit or falling apart after a couple of weeks.

Rob R

  • Weekend Warrior
  • ***
  • Posts: 141
Re: FZ1 Gen 2 - Chinese radiator experience?
« Reply #5 on: 14 April 2016, 09:47:52 pm »
Glad you got your radiator. Did you check out any Yamaha dealers in the Euro Zone? Not sure what the exchange rate is now, but when I was looking for bits it was much cheaper to get parts from Italy, Spain or even Germany!
Rob

AyJay

  • WSB Pack Hound
  • *****
  • Posts: 555
Re: FZ1 Gen 2 - Chinese radiator experience?
« Reply #6 on: 14 April 2016, 10:23:10 pm »
For anyone else with the same problem, I've got a 70 quid chinese radiator on my Gen 1. It fitted fine and it's done a few thousand miles now and it's not leaked yet.

It is definitely not quality though. Very thin mounting lugs and seems to lack solidity. I did slap another 3 or 4 coats of paint on it before I fitted it, so who knows how long it will last.
I will be getting my old radiator re-cored by the local radiator specialist for when it goes west, and the prices aren't stratospheric, so have a word with your local guys (Serck are good and nationwide)