Just found it and yes, it does show it more clearly. Will have to check all the routing, get the clutch adjusted and check compression just in case, as it has that slight misfire on low revs, considering someone put it back wrong, I'm starting to think did it overheat and caused a problem on pot No.1 or is it just cap problem? If it'd be something more substantial though it would be manifested at higher revs and under load and it doesn't so shouldn't be the case, but doesn't hurt to check. Also electrics need looking at, so plenty of things to do before I'll be able to properly run it. Did my Mod 1 on my old Divvy though, now Mod 2 will be most likely on the Divvy as well, I was hoping to use Fazer for both but I need to make sure it's reliable and without any issues first. Thanks for all your help, I'll post an update as soon as I'm at it. Thanks for info on another manual, helps a lot as well.