Date: 11-11-25  Time: 18:28 pm

Author Topic: Back to the Future Snapped studs and the like  (Read 3693 times)

fazersharp

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 6,968
Back to the Future Snapped studs and the like
« on: 03 April 2015, 12:19:09 pm »
When I finally get around to fitting a flux capacitor to to my fazer, im going to go back to 1998 and tell everyone to take those nuts off and put back with copper grease, or swap studs and nuts for stainless steel.


So what other ideas do people have for things that could of been done to save us all problems that we now have to deal with on our fazers   

Andy Clap

  • Club Racer
  • ****
  • Posts: 285
Re: Snapped studs and the like
« Reply #1 on: 03 April 2015, 01:42:58 pm »
12mm front sprocket nut.  Paint the centre stand to a standard which will stop it rusting.


Dinger1962

  • Naughty Corner
  • Weekend Warrior
  • ***
  • Posts: 214
Re: Back to the Future Snapped studs and the like
« Reply #2 on: 03 April 2015, 03:20:55 pm »
Motorcycle Awareness course made compulsary in car driving test/all over 60s to sit some form of test/assesment .i think ive got a Stealth switch on my bike which makes me invisible---

Frosties

  • GP Hero
  • ******
  • Posts: 2,489
Re: Back to the Future Snapped studs and the like
« Reply #3 on: 03 April 2015, 04:04:21 pm »
Better screen and mirrors.

ChristoT

  • GP Hero
  • ******
  • Posts: 5,207
Re: Back to the Future Snapped studs and the like
« Reply #4 on: 03 April 2015, 05:36:05 pm »
Removed the 6K buzzing. Oh, and not fucked up the FZ6 engine!

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #5 on: 03 April 2015, 05:40:23 pm »
Motorcycle Awareness course made compulsary in car driving test/all over 60s to sit some form of test/assesment .i think ive got a Stealth switch on my bike which makes me invisible---
I agree, to a certain point with this!
Not to be controversial but I drive a car and a truck as well as ride my bike..of which I have my IAM for all..just giving you some background before the next part!
Lots of bikers don't realise that if they can't see the driver of the vehicles,  what chance has the vehicle drivers got in seeing them?
Just one example that I get often is bikes sitting up close to my rear end on the truck, they are out of my sight then suddenly they want to overtake, out they pop, with a hope and a prayer by the looks of some of them, then blast past shaking their wee heads off as if it's my fault they can't see past me! Or even that I don't 'tell them' it's clear (more on this later)
If those guys when sitting their test are shown what to do, ie get in view, they would be much better prepared for the real world.
It's not that I don't see them approaching, I most certainly do, but when they sit where I can't see them, that's just asking for trouble. And just before anyone says I should indicate to show them it's clear if I'm aware that they are there,
1. It's against the rules of the highway code making it illegal.
2. If caught doing it I could be liable in a court of law. 
Sorry, it's not my shout to tell anyone behind me that it's clear, that's their shout m'lord.
Yes, big rant over, happy biking and stay safe.

Dead Eye

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 3,753
Re: Back to the Future Snapped studs and the like
« Reply #6 on: 03 April 2015, 05:52:28 pm »
Though not applicable to the thread, I agree with sinto :)

As for the topic... I almost want to suggest some sort of change to the original downpipes. They rust away like crazy, BUT they are generally accepted as the best performing so I'm not sure...

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #7 on: 03 April 2015, 06:00:02 pm »
Though not applicable to the thread, I agree with sinto :)

Sorta new to this malarkey, sorry if I done it wrong :-(
(can't do emoticons as I use my phone)

As for the topic....

Ok, I'd love a changing room like Mr Ben so I could go on those crazy adventures he had!

chris.biker

  • Naughty Corner
  • WSB Pack Hound
  • *****
  • Posts: 551
Re: Back to the Future Snapped studs and the like
« Reply #8 on: 03 April 2015, 06:27:29 pm »
Though not applicable to the thread, I agree with sinto :)

Sorta new to this malarkey, sorry if I done it wrong :-(
(can't do emoticons as I use my phone)

As for the topic....

Ok, I'd love a changing room like Mr Ben so I could go on those crazy adventures he had!


Every visit to leave the changing room in full leathers and step out on The Isle Of Man during TT week.

mtread

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 3,007
Re: Back to the Future Snapped studs and the like
« Reply #9 on: 03 April 2015, 08:12:15 pm »
Don't buy a Bandit first. Just go straight to Fazer  :)


alan sherman

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 9,812
Re: Back to the Future Snapped studs and the like
« Reply #10 on: 03 April 2015, 09:21:21 pm »
As soon as buying an FZS600 take all the fasteners out and replace with stainless (Titanium for brakes), apply copper slip and sorted.

Never fit an alarm....

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #11 on: 03 April 2015, 10:40:17 pm »

Never fit an alarm....

Super, won't need to ask about that then lol

fazersharp

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 6,968
Re: Back to the Future Snapped studs and the like
« Reply #12 on: 03 April 2015, 10:52:34 pm »
Go into the design shop and tell them to Please put the fairing in a wind tunnel to see if it can be made any better, as all we can do now is try to improve it with after market screens.
And yes that chap you are using to test the mirrors ---- change him for one with broader shoulders please

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #13 on: 03 April 2015, 11:10:56 pm »
Also tell them to put in decent lights while they're at it B-)

fazersharp

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 6,968
Re: Back to the Future Snapped studs and the like
« Reply #14 on: 03 April 2015, 11:15:38 pm »
I think someone did tell them but they only went back to 2002 (or whenever the foxeye came out)

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #15 on: 03 April 2015, 11:42:17 pm »
I think someone did tell them but they only went back to 2002 (or whenever the foxeye came out)
Yeah I bet that's what really happened lol

Billy Balthorpe

  • Naughty Corner
  • Club Racer
  • ****
  • Posts: 467
Re: Back to the Future Snapped studs and the like
« Reply #16 on: 05 April 2015, 06:48:31 pm »

The first thing I thought when I saw my Fazer was "I'm going to have to have the engine out to get all the broken exhaust studs out when I change the exhaust". They are rusty as feck.

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #17 on: 05 April 2015, 07:08:10 pm »

The first thing I thought when I saw my Fazer was "I'm going to have to have the engine out to get all the broken exhaust studs out when I change the exhaust". They are rusty as feck.
I'm sure we'd replace the exhaust and studs as it rolled out the factory if we had the chance ;-)

darrsi

  • GP Hero
  • ******
  • Posts: 10,671
Re: Back to the Future Snapped studs and the like
« Reply #18 on: 05 April 2015, 11:01:05 pm »
Motorcycle Awareness course made compulsary in car driving test/all over 60s to sit some form of test/assesment .i think ive got a Stealth switch on my bike which makes me invisible---
I agree, to a certain point with this!
Not to be controversial but I drive a car and a truck as well as ride my bike..of which I have my IAM for all..just giving you some background before the next part!
Lots of bikers don't realise that if they can't see the driver of the vehicles,  what chance has the vehicle drivers got in seeing them?
Just one example that I get often is bikes sitting up close to my rear end on the truck, they are out of my sight then suddenly they want to overtake, out they pop, with a hope and a prayer by the looks of some of them, then blast past shaking their wee heads off as if it's my fault they can't see past me! Or even that I don't 'tell them' it's clear (more on this later)
If those guys when sitting their test are shown what to do, ie get in view, they would be much better prepared for the real world.
It's not that I don't see them approaching, I most certainly do, but when they sit where I can't see them, that's just asking for trouble. And just before anyone says I should indicate to show them it's clear if I'm aware that they are there,
1. It's against the rules of the highway code making it illegal.
2. If caught doing it I could be liable in a court of law. 
Sorry, it's not my shout to tell anyone behind me that it's clear, that's their shout m'lord.
Yes, big rant over, happy biking and stay safe.



I sat behind a lorry once, in line with his mirror so he could see me, but at least 3 cars length behind with no intention of overtaking as it was a narrow road, then i saw his arm come out the window and he emptied a whole flask of tea or coffee that i saw flying through the air and i just managed to dip behind his lorry to avoid it.
When i went back in line with his mirror and raised by hand to question why he did it, he started spitting out the window instead and i could see the anger in his face.  :grumble
Don't think he was a biker as well?  :lol 

sinto

  • GP Hero
  • ******
  • Posts: 2,158
Re: Back to the Future Snapped studs and the like
« Reply #19 on: 05 April 2015, 11:43:54 pm »
"Don't think he was a biker? "
Of course he wasn't,  and he wasn't Scottish either as who would waste a whole flask of tea? Lol