So... life went bad for the MG over the weekend...
The new gearbox is mostly shot - god damn seller lied about its state...
Here is the damage to the cover surrounding the oil seal for the nearside driveshaft
|
ZS |
After a bit of investigative work on the old box I figured I could just swap over the casings and life would be good. This did not work. I struggled for a bit trying to get the cover off of the old box, eventually resorting to Google where I found that there is a circlip hiding behind a bolt that needs to be released. Did this and off popped the cover with little effort. I proceeded to remove the new box from the car to do the same thing... but no. Not a chance. Fucker won't budge. I've done everything exactly the same as the old box but the cover still only lifts about 20mm and no further.
Stupid circlip...
|
ZS |
Old gearbox
|
ZS |
The real concerns are that there is some not very nice stuff leaking out of the box that happens to include metal filings... a fair few of them... and then, just to add salt to the wound, suddenly I hear tap tap tap tap as a load of ball bearings decide to make a bid for freedom. Looks like the bearing carrier on the offside of the diff has given up on life, which just so happens to be the one I can't even get to without dismantling the entire thing
Then I get a call from the estate agents. They aren't impressed with my vehicular maintenance. So, after all this, I give up. Old box, despite its issues, is going back on. I'll admit that I've made a bodge of this project from start to finish... but you live and learn. I look forward to having a nice 2+ car garage in the future where I have all the space I need, heating, lighting, tools where I can do whatever the foc I want