Can't get neutral

[HJFazer]

Hey, so assistance needed please.

Even with clutch in I can't get neutral and it won't start in gear.

I think the cable must be too stretched and do not fully engaging causing the above.

Does that sound right? Any thoughts on fixing it?

Have changed the levers a few weeks ago so night try the old one in the hope it pulls it enough.

Help appreciated,

Haydn

[His Dudeness]

Have you tried rocking it back and forward while changing gears? Is your chain very slack?

[HJFazer]

Got it in eventually. Chain is within the tolerance but at the lose end of it.

Think it might need a new cable as it's pretty slack and I'll tighten the chain as well.

Cheers

[unfazed]

Got it in eventually. Chain is within the tolerance but at the lose end of it.

Think it might need a new cable as it's pretty slack and I'll tighten the chain as well.

Cheers

Check the clutch adjustment at the Sprocket cover side.

[darrsi]

Got it in eventually. Chain is within the tolerance but at the lose end of it.

Think it might need a new cable as it's pretty slack and I'll tighten the chain as well.

Cheers

+1 to that.
Lower end first then tweak at the lever end.

Check the clutch adjustment at the Sprocket cover side.

[HJFazer]

Cheers guys, will have a play tomorrow

[Jules-C]

Check the sprocket cover screws are tight. They have been known to unscrew giving the same symptoms as a stretched cable