This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Budthewiser
Pages: [1]
1
« on: 02 September 2020, 02:40:59 pm »
[size=78%]I put a multimeter on the connectors supply to the pump and got 12volts. I then took the fuel pump out and the connectors in the tank were badly corroded. The pump work fine so I've ordered a new fuel filter and while I'm waiting I'll double check the pump is pumping but I think I've solved the problem[/size]  [/size][size=78%]. All down to corroded connectors on the power supply to the pump[/size]
2
« on: 31 August 2020, 10:37:40 am »
Any one???  So what happens is, when the bike it turned on the fuel pump is supposed to prime but its dead. I’ve checked to see if there is voltage to the pump and its seems to be intermittent. So before i buy a new one , is ther a test i can do to check the feul pump relay??
3
« on: 31 August 2020, 10:32:30 am »
I'll have a look but it wownt start now, j think it's the fuel pump relay. The connectors looked ok on the startef relay.
4
« on: 29 August 2020, 01:28:42 pm »
That's if lads, anyone know how to test a fuel pump relay. My bike will turn over bug will not start. I dont here the pump priming on start up.
5
« on: 29 August 2020, 01:26:15 pm »
I'll have a look but it wownt start now, j think it's the fuel pump relay. The connectors looked ok on the startef relay.
6
« on: 23 August 2020, 10:23:53 pm »
Got it going, loose wire under the seat, I just disconnected and reconnected everything and ...BOOOM ...shes firing on all 4. Still waiting on handle bars, front left indicator and crash bobbins and shes finished. Thanks lads.
7
« on: 23 August 2020, 12:19:54 pm »
The rebuild on the FZ1 is nearly finished, i tried to start it yestersay but it wown't start. The pump primes but the nothing, not even trying to turn over. When i try and start it, the engine light comes on, Any ideas. Loose wire fuses side stand?
8
« on: 23 July 2020, 10:20:15 am »
Bought a similar set for zx9r and had the same problem, I'll keep searching. There not on the original bike but i like the way they look so if I can get them at the right price I put them on.
9
« on: 22 July 2020, 04:21:14 pm »
Gents the project FZ1 2007 that I have is going very slowly. An idea that I have is to add the larger side fairings. Wheres the cheapest place to find them, £380 on Ebay is to much considering they need to be sprayed as well.
10
« on: 12 June 2020, 05:31:55 pm »
Its definatly out, The picture dosn't show it but as the part is on the bike the lower clamp is pushed down on the left and back so over the length of the fork it kicks it out about 10 mm. Ive plenty of other stuff to do so ill wait and see if one shows up on Flee bay. I would have thought some other Triple tree from another Yamaha would fit?
11
« on: 12 June 2020, 08:45:55 am »
Gents, I bought a second gen FZ1 that the front end is knackered. I bought a Headlight and nose fairing and the left shock all ready. After putting it together it appears the lower tripple tree is also bent so I need a replacement so if anyone knows where I can get one or if any other yamaha will fit, please let me know.
12
« on: 12 June 2020, 08:39:00 am »
New on here. Own two FZ1'S. One first gen and a very beat up second gen project that I need advise on, Living in Ireland.
Pages: [1]
|
Show Posts