Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: mike26 on 04 November 2011, 04:39:02 pm

Title: replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
Post by: mike26 on 04 November 2011, 04:39:02 pm

hi guys
this is really starting to annoy me now my bike has a new selector fork and still jumps out of 2nd gear all i cn think is my drum has gone to i havent tried replacing that yet thought what should the drum look like condition i mean ???
any help or advice appreciated
thanks mike

Title: Re: replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
Post by: mike26 on 04 November 2011, 04:47:41 pm

ok i think its the selector drum has anyone got a good one for sale?

Title: Re: replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
Post by: solorider on 04 November 2011, 08:26:11 pm

it could be the 2nd gear itself,if the dogs have worn then the gear will drop out like you are geting,and 2nd is the most common gear to wear

Title: Re: replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
Post by: b3tarev3 on 05 November 2011, 12:17:26 am

Quote from: solorider on 04 November 2011, 08:26:11 pm

it could be the 2nd gear itself,if the dogs have worn then the gear will drop out like you are geting,and 2nd is the most common gear to wear

I'd agree with solorider - if the dogs are fooked it will cause it to jump out of gear. Must be a pisser to have rebuilt it to find it still jumping out of gear, good luck dude. :'(

Title: Re: replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
Post by: Captain Haddock on 05 November 2011, 11:08:46 am

I've had it happen on boat outdrives, once the edges of the dogs get rounded over they push themselves out of mesh like a cam as soon as you put any power through them, usually causing selector forks to flex or bend, replacement is the only way out, also check the gear it's meshing with as that will be worn too and will soon were a new gear.

Title: Re: replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
Post by: Deefer666 on 05 November 2011, 08:40:36 pm

I've got a few decent drums in my big box of engine bits.