old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: chrischristopherson1313 on 26 April 2017, 09:49:35 pm

Title: Led light
Post by: chrischristopherson1313 on 26 April 2017, 09:49:35 pm

Changed indicators to led and they doesn't work when headlight is on. Do I need to change H4 bulb to led as well. Normal bulbs indicators works fine. Check on both relays (led and oem)

Title: Re: Led light
Post by: slappy on 27 April 2017, 08:03:32 am

I could be wrong here but don't you need to fit some sort of inline resistor to get led indicators to work correctly?

Title: Re: Led light
Post by: chrischristopherson1313 on 27 April 2017, 08:06:36 am

Quote from: slappy on 27 April 2017, 08:03:32 am

I could be wrong here but don't you need to fit some sort of inline resistor to get led indicators to work correctly?

I put led relay so indicators works fine.
Only when I turn lights on they stop working.

Title: Re: Led light
Post by: slappy on 27 April 2017, 08:15:40 am

I would check that all your earth points are good, clean them up and use contact cleaner on all connectors, check any wiring you might have disturbed when fitting the relay and indicators.

Title: Re: Led light
Post by: BBROWN1664 on 27 April 2017, 09:21:08 am

Sounds like a wiring issue.

Title: Re: Led light
Post by: Bretty on 27 April 2017, 10:28:52 am

The wiring diagram in the Haynes manual is pretty handy when fault finding the lights and indicators.