HiNo lathe or Milling M/c, Just a Hacksaw,a File or two ,a cheap pedestal drill a couple of drills and metric taps.Come on you can do it ATB YFM
i've modified a few bikes over the years and used whatever was available. cbr600 rear sets are fairly cheap on ebay, but i would usually weld a suitable plate to suit. not something you can do on an assembled bike very easily though.
Hi Andy Good idea for the gear link extension ATB YFM
HiI made my own the 30x5 MS strip came from B&QThey raise the footrests up 20mm and back10mmhttps://dl.dropbox.com/u/70564722/img022.jpghttps://dl.dropbox.com/u/70564722/rearsets1.jpgI used 8mm x 20mm cap head bolts to hold the footrests with a std washer between the Brk and the footest to give enough clearance for the head of Fazer bolts holding the Brk to the bike.Edit :- In the photo I hadn't made the gearlink extension just moved the lever around the splines.Heres a link to an earlier post :- http://foc-u.co.uk/index.php?topic=3007.msg24310#msg24310ATB YFM
HiI also made some Rear Footrest Hangers that moved the footrests forward 50mm and down 50mmThe wife was getting cramp on the pillion. https://dl.dropbox.com/u/70564722/87.jpghttps://dl.dropbox.com/u/70564722/88.JPGhttps://dl.dropbox.com/u/70564722/90.JPGhttps://dl.dropbox.com/u/70564722/100.JPGATB YFM
just to add to this thread, I am in the process of adapting my SES rearsets from one of my Ducati's to fit the FZS. the bolt holes are only 2mm out, so a tiny amount of filing is needed they may be an option for you too?
Hi With the Ducati rearsets fitted have you pushed the bike off the centerstand.I seem to recall the lever that you put your foot on when operating the centerstand with my mod fitted came quite close to the footrestand the Ducati ones look a lot further back and may clash with the centerstand foot lever. ATB YFM