https://foc-u.co.uk/mybb/ Wed, 29 Apr 2026 16:51:20 +0000 MyBB https://foc-u.co.uk/mybb/showthread.php?tid=83997 Fri, 24 Apr 2026 19:55:12 +0100 FazerSweden]]> https://foc-u.co.uk/mybb/showthread.php?tid=83997
Thanks for letting me join the forum.

I`ve been searching through the forum but i couldent find a clear answer to my issue,so i decided to start a new thread.

I have a FZS 1000 from 2001 buildning a caferacer and ive installed a cheap chinese/amazon after market gauge.

The bike runs fine as far as i know ! I added a slip-on so the sound is different.

But the problems i have is that i cant get the RPM and Speedometer to work, some signal issue i think.

I have it wired up on the original speedo wires and set to 1 magnet and 1950mm but the km/H just goes from zero to 150 real Quick and the RPM Yellow/black wire dont work aswell.

I have some leftover wires from the original gauge probably oil,temp and so on, do i have to Connect them ore just isolate ?

Has anybody else fitted a new aftermarket and can help, ore give some advise.
And if there is a good nice round that works i can buy a new one.

Thanks in advance]]>
Thanks for letting me join the forum.

I`ve been searching through the forum but i couldent find a clear answer to my issue,so i decided to start a new thread.

I have a FZS 1000 from 2001 buildning a caferacer and ive installed a cheap chinese/amazon after market gauge.

The bike runs fine as far as i know ! I added a slip-on so the sound is different.

But the problems i have is that i cant get the RPM and Speedometer to work, some signal issue i think.

I have it wired up on the original speedo wires and set to 1 magnet and 1950mm but the km/H just goes from zero to 150 real Quick and the RPM Yellow/black wire dont work aswell.

I have some leftover wires from the original gauge probably oil,temp and so on, do i have to Connect them ore just isolate ?

Has anybody else fitted a new aftermarket and can help, ore give some advise.
And if there is a good nice round that works i can buy a new one.

Thanks in advance]]> https://foc-u.co.uk/mybb/showthread.php?tid=83977 Sun, 29 Mar 2026 23:25:59 +0100 DickL]]> https://foc-u.co.uk/mybb/showthread.php?tid=83977 https://foc-u.co.uk/mybb/showthread.php?tid=83969 Thu, 12 Mar 2026 17:13:40 +0000 SkidT]]> https://foc-u.co.uk/mybb/showthread.php?tid=83969
Having a trawl through some stuff and came across the 2001 Ride magazine review of the Gen1 Fazer 1000.

Anyone like the magazine forwarded to them, before I dispose of it? 1st come 1st served, decided by PM timings.
Just cover the postage cost. ?

Cheers]]>
Having a trawl through some stuff and came across the 2001 Ride magazine review of the Gen1 Fazer 1000.

Anyone like the magazine forwarded to them, before I dispose of it? 1st come 1st served, decided by PM timings.
Just cover the postage cost. ?

Cheers]]> https://foc-u.co.uk/mybb/showthread.php?tid=83967 Tue, 03 Mar 2026 21:51:05 +0000 Greg13]]> https://foc-u.co.uk/mybb/showthread.php?tid=83967
Gonna get another gen 1 soon but as I always thought the suspension wasn't great I want to upgrade.

Is there a list anywhere of shocks and forks from other bikes that fit fazers?

Thanks

Greg]]>
Gonna get another gen 1 soon but as I always thought the suspension wasn't great I want to upgrade.

Is there a list anywhere of shocks and forks from other bikes that fit fazers?

Thanks

Greg]]> https://foc-u.co.uk/mybb/showthread.php?tid=83966 Wed, 25 Feb 2026 15:09:48 +0000 ptolemyx]]> https://foc-u.co.uk/mybb/showthread.php?tid=83966 https://foc-u.co.uk/mybb/showthread.php?tid=83965 Mon, 23 Feb 2026 08:38:59 +0000 ptolemyx]]> https://foc-u.co.uk/mybb/showthread.php?tid=83965 https://foc-u.co.uk/mybb/showthread.php?tid=83964 Sun, 22 Feb 2026 16:45:56 +0000 Woodzey80]]> https://foc-u.co.uk/mybb/showthread.php?tid=83964 https://foc-u.co.uk/mybb/showthread.php?tid=83960 Mon, 02 Feb 2026 14:34:04 +0000 robbo]]> https://foc-u.co.uk/mybb/showthread.php?tid=83960 Nothing much planned until Le Mans 24 hour in April, which is always a good ride off the beaten track.

  20160202_130631_copy_1632x1224.jpg (Size: 168.35 KB / Downloads: 0) ]]> Nothing much planned until Le Mans 24 hour in April, which is always a good ride off the beaten track.

  20160202_130631_copy_1632x1224.jpg (Size: 168.35 KB / Downloads: 0) ]]> https://foc-u.co.uk/mybb/showthread.php?tid=83956 Sun, 18 Jan 2026 14:32:11 +0000 Stew53uk]]> https://foc-u.co.uk/mybb/showthread.php?tid=83956 , ie 2005 bikes came with the black engine. Some I have seen have the silver engine, confused.]]> , ie 2005 bikes came with the black engine. Some I have seen have the silver engine, confused.]]> https://foc-u.co.uk/mybb/showthread.php?tid=83944 Wed, 31 Dec 2025 13:47:03 +0000 PhilFazer1000]]> https://foc-u.co.uk/mybb/showthread.php?tid=83944 Any tips regarding changing it please?]]> Any tips regarding changing it please?]]> https://foc-u.co.uk/mybb/showthread.php?tid=83936 Sat, 13 Dec 2025 09:32:15 +0000 Nick200wrx]]> https://foc-u.co.uk/mybb/showthread.php?tid=83936 https://foc-u.co.uk/mybb/showthread.php?tid=83933 Mon, 08 Dec 2025 19:01:02 +0000 NitramA]]> https://foc-u.co.uk/mybb/showthread.php?tid=83933 In the 20 odd years I've had the bike, I've never done this. I had a quick look at the bike - too cold to give it more than a cursory look - I couldn't detect any movement.
Not wishing to fix something that's not broken I thought I'd ask the group.

Is this part of your normal maintenance and should you be able to detect any movement?]]> In the 20 odd years I've had the bike, I've never done this. I had a quick look at the bike - too cold to give it more than a cursory look - I couldn't detect any movement.
Not wishing to fix something that's not broken I thought I'd ask the group.

Is this part of your normal maintenance and should you be able to detect any movement?]]> https://foc-u.co.uk/mybb/showthread.php?tid=83930 Mon, 01 Dec 2025 16:25:19 +0000 Decoke Dave]]> https://foc-u.co.uk/mybb/showthread.php?tid=83930 https://foc-u.co.uk/mybb/showthread.php?tid=83929 Sat, 29 Nov 2025 12:22:25 +0000 Wobbly]]> https://foc-u.co.uk/mybb/showthread.php?tid=83929
I've read about the inner workings of the Multigauge designed by Christian Vieth (Schlumpf) on his info-packed website. Christian has very helpfully shared the ratios of pulse frequencies from the sensors for engine rpm and for speed for each gear - I'm only interested in that for 6th - and as far as I understand, all that would be required would be the means to calculate the ratio in real time, compare it with one stored in a register, and then illuminate an LED or activate a relay when the current ratio equals that pre-stored for 6th gear.

Has anyone done this already? If not, does anyone here have the necessary knowledge?

Thanks in advance for any suggestions.]]>
I've read about the inner workings of the Multigauge designed by Christian Vieth (Schlumpf) on his info-packed website. Christian has very helpfully shared the ratios of pulse frequencies from the sensors for engine rpm and for speed for each gear - I'm only interested in that for 6th - and as far as I understand, all that would be required would be the means to calculate the ratio in real time, compare it with one stored in a register, and then illuminate an LED or activate a relay when the current ratio equals that pre-stored for 6th gear.

Has anyone done this already? If not, does anyone here have the necessary knowledge?

Thanks in advance for any suggestions.]]> https://foc-u.co.uk/mybb/showthread.php?tid=83927 Thu, 27 Nov 2025 05:01:39 +0000 Talon26]]> https://foc-u.co.uk/mybb/showthread.php?tid=83927
Update, when pulling the headlight fuse, the dash display (odo and clock) work again, but still no neutral light or crank when start is pushed, even with clutch in. All fuses are good. .]]>
Update, when pulling the headlight fuse, the dash display (odo and clock) work again, but still no neutral light or crank when start is pushed, even with clutch in. All fuses are good. .]]>