So Im replacing my front mudguard, as the old one cracked around the upper mounting points. And I dont know if this is because the previous owner fitted the t-washer/s incorrectly.
- First question is, when you guys have fitted/removed the mudguard, which directions did you have the t-washers? was it as per the yamaha/fowlers parts diagram? (see attached)
- Second question is with regards to the rubbers isolation gromets appear to be sided, which isnt indicated on the diagram. As in one side is the same outer diameter as the t-washer and the other sider has a smaller diameter. MU logica is I fit the gromets so the bigger side faces the t-washer.
ta.
- First question is, when you guys have fitted/removed the mudguard, which directions did you have the t-washers? was it as per the yamaha/fowlers parts diagram? (see attached)
- Second question is with regards to the rubbers isolation gromets appear to be sided, which isnt indicated on the diagram. As in one side is the same outer diameter as the t-washer and the other sider has a smaller diameter. MU logica is I fit the gromets so the bigger side faces the t-washer.
ta.