+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: mk1 600 fazer decal dimensions (/showthread.php?tid=83761)
mk1 600 fazer decal dimensions - Dean - 24-04-25
RE: mk1 600 fazer decal dimensions - fazersharp - 26-04-25
(24-04-25, 10:06 AM)Dean Wrote: is there any info showing the mk1 600 fazer decal /sticker dimensions for the YAMAHA decal for tank and front/rear, thanks for any help
I could get my ruler out for you later.
RE: mk1 600 fazer decal dimensions - Dean - 26-04-25
(26-04-25, 11:16 AM)fazersharp Wrote:(24-04-25, 10:06 AM)Dean Wrote: is there any info showing the mk1 600 fazer decal /sticker dimensions for the YAMAHA decal for tank and front/rear, thanks for any help
I could get my ruler out for you later.
that would be much appreciated, annoyed i didnt measure the old ones before new paint job
RE: mk1 600 fazer decal dimensions - fazersharp - 29-04-25
Sorry - only just got round to it.
Front 96mm x23 high, width measured from the left hand side of the top "corner" of the Y to the right hand sidetop far right corner of the A. The one on the back is the same dimentions
Tank
same measuring positions and is 153 x37.
RE: mk1 600 fazer decal dimensions - Dean - 29-04-25
(29-04-25, 10:09 AM)fazersharp Wrote: Sorry - only just got round to it.
Front 96mm x23 high, width measured from the left hand side of the top "corner" of the Y to the right hand sidetop far right corner of the A. The one on the back is the same dimentions
Tank
same measuring positions and is 153 x37.
no problem, thats a great help, thanks very much for your help, much appreciated, i should have asked about the side fazer 1 too but i had just bought a pair and they look smaller than i think they should be, and ive saw 2 rear panels with different sizes so i guess 1 is for mk1 and other mk2
RE: mk1 600 fazer decal dimensions - fazersharp - 29-04-25
(29-04-25, 11:14 AM)Dean Wrote:(29-04-25, 10:09 AM)fazersharp Wrote: Sorry - only just got round to it.
Front 96mm x23 high, width measured from the left hand side of the top "corner" of the Y to the right hand sidetop far right corner of the A. The one on the back is the same dimentions
Tank
same measuring positions and is 153 x37.
no problem, thats a great help, thanks very much for your help, much appreciated, i should have asked about the side fazer 1 too but i had just bought a pair and they look smaller than i think they should be, and ive saw 2 rear panels with different sizes so i guess 1 is for mk1 and other mk2
By rear do you mean the "FAZER" above the rear lights
The side ones on the fairing are no so straight forward as they also have a drop shadow.
RE: mk1 600 fazer decal dimensions - Dean - 29-04-25
(29-04-25, 02:05 PM)fazersharp Wrote:(29-04-25, 11:14 AM)Dean Wrote:(29-04-25, 10:09 AM)fazersharp Wrote: Sorry - only just got round to it.
Front 96mm x23 high, width measured from the left hand side of the top "corner" of the Y to the right hand sidetop far right corner of the A. The one on the back is the same dimentions
Tank
same measuring positions and is 153 x37.
no problem, thats a great help, thanks very much for your help, much appreciated, i should have asked about the side fazer 1 too but i had just bought a pair and they look smaller than i think they should be, and ive saw 2 rear panels with different sizes so i guess 1 is for mk1 and other mk2
By rear do you mean the "FAZER" above the rear lights
The side ones on the fairing are no so straight forward as they also have a drop shadow.
i guess you meant yamaha above the rear lights, ive got 1 thats the same dimensions you said so ile go with that as its bigger than my other 1, i know what you mean about the drop shadow side fazer ones but just the solid black would be good enough as i can just double up the same size in white etc, cheers
RE: mk1 600 fazer decal dimensions - fazersharp - 30-04-25
Ok I will get some dimensions.
FAZER is silver and the drop shadow is a mid grey- slightly darker than the FAZER silver. Well at least that is how it is on the black one anyway
RE: mk1 600 fazer decal dimensions - Dean - 01-05-25
(30-04-25, 09:27 PM)fazersharp Wrote: Ok I will get some dimensions.
FAZER is silver and the drop shadow is a mid grey- slightly darker than the FAZER silver. Well at least that is how it is on the black one anyway
that would be great thanks
RE: mk1 600 fazer decal dimensions - Dean - 05-05-25
(30-04-25, 09:27 PM)fazersharp Wrote: Ok I will get some dimensions.
FAZER is silver and the drop shadow is a mid grey- slightly darker than the FAZER silver. Well at least that is how it is on the black one anyway
Ive managed to find the correct size, thanks anyway
RE: mk1 600 fazer decal dimensions - fazersharp - 09-05-25
Sorry for being so slow but I have been away. And to get to my bike I have to de activate the landmines and call off the hounds !
RE: mk1 600 fazer decal dimensions - Dean - 10-05-25
(09-05-25, 09:30 PM)fazersharp Wrote: Sorry for being so slow but I have been away. And to get to my bike I have to de activate the landmines and call off the hounds !
no worries, at least you offered to help when no one else did, its sorted now?
RE: mk1 600 fazer decal dimensions - fazersharp - 10-05-25
(10-05-25, 10:00 AM)Dean Wrote:(09-05-25, 09:30 PM)fazersharp Wrote: Sorry for being so slow but I have been away. And to get to my bike I have to de activate the landmines and call off the hounds !
no worries, at least you offered to help when no one else did, its sorted now?
To be fair this site is not as busy as it used to be and MK1s are maybe getting sparse ) At least ones still with the decals). I went to a bike meet maybe a couple of hundred there and not one MK1 apart from mine.
Maybe post up some links for others for the decals that were correct.
RE: mk1 600 fazer decal dimensions - Faze2 - 11-05-25
(10-05-25, 10:57 AM)fazersharp Wrote:MK1s are the best(10-05-25, 10:00 AM)Dean Wrote:(09-05-25, 09:30 PM)fazersharp Wrote: Sorry for being so slow but I have been away. And to get to my bike I have to de activate the landmines and call off the hounds !
no worries, at least you offered to help when no one else did, its sorted now?
To be fair this site is not as busy as it used to be and MK1s are maybe getting sparse ) At least ones still with the decals). I went to a bike meet maybe a couple of hundred there and not one MK1 apart from mine.
Maybe post up some links for others for the decals that were correct.
RE: mk1 600 fazer decal dimensions - fazersharp - 12-05-25
Never seen one with fairing indicators like that. You seem to have an extra Yamaha on the back- side
RE: mk1 600 fazer decal dimensions - Faze2 - 24-05-25
(12-05-25, 11:15 AM)fazersharp Wrote: Never seen one with fairing indicators like that. You seem to have an extra Yamaha on the back- side
I had a nice person reverse into my lovely standard breaking several parts indicators being one, thought id go full led with insurance money and those seem to suit the fairing. Its not the norm but its mine ?
(24-05-25, 10:00 PM)Faze2 Wrote:Sticker was there when bought after collision other side doesn't have sticker quite annoying but liveable and unique.(12-05-25, 11:15 AM)fazersharp Wrote: Never seen one with fairing indicators like that. You seem to have an extra Yamaha on the back- side
I had a nice person reverse into my lovely standard breaking several parts indicators being one, thought id go full led with insurance money and those seem to suit the fairing. Its not the norm but its mine ?
Its not your normal FZS ?
RE: mk1 600 fazer decal dimensions - robbo - 31-05-25
Sharp boxeye for sure ??
RE: mk1 600 fazer decal dimensions - fazersharp - 01-06-25
(24-05-25, 10:00 PM)Faze2 Wrote:
Its not your normal FZS ?
(31-05-25, 02:44 PM)robbo Wrote: Sharp boxeye for sure ??
I was confused by the statement "Its not your normal FZS ?"
was he asking is mine not normal or was it normal or is he saying his is "not your normal FZS"
Anyway yes mine is a 98 Box eye and at last count was the oldest one on the forum registered May 98. The sticker you have on the side is for the back above the lights they dont originally go on the side panel
Here you go taken a couple of weeks ago. I took off the grab rail to fit a single seat conversion but it looked rubbish and when I cam to put the grabrail back I decided that i liked the look without the grabrail so left it off and put a little black vinyl patch over the holes. If you zoom in you can see.
RE: mk1 600 fazer decal dimensions - Faze2 - 13-06-25
(01-06-25, 12:07 PM)fazersharp Wrote:Nice ride,(24-05-25, 10:00 PM)Faze2 Wrote:
Its not your normal FZS ?
(31-05-25, 02:44 PM)robbo Wrote: Sharp boxeye for sure ??
I was confused by the statement "Its not your normal FZS ?"
was he asking is mine not normal or was it normal or is he saying his is "not your normal FZS"
Anyway yes mine is a 98 Box eye and at last count was the oldest one on the forum registered May 98. The sticker you have on the side is for the back above the lights they dont originally go on the side panel
Here you go taken a couple of weeks ago. I took off the grab rail to fit a single seat conversion but it looked rubbish and when I cam to put the grabrail back I decided that i liked the look without the grabrail so left it off and put a little black vinyl patch over the holes. If you zoom in you can see.
I meant mines not normal, it was until some kind person reversed into it knocking it over onto its side.
So out with the old and in with the new, LEDs all round with dual front light conversion, smoke back and those fairing indicators.
The rear stickers were on when purchased bit now only one side after the knocking over incident causing the need for replacement.
I like to tinker so keeps me happy.
?
RE: mk1 600 fazer decal dimensions - Faze2 - 14-06-25
(Yesterday, 10:42 PM)Faze2 Wrote:Aaaah I see the ? And ?? Its smileys on phone being turned into question marks when used off keyboard instead of site(01-06-25, 12:07 PM)fazersharp Wrote:Nice ride,(24-05-25, 10:00 PM)Faze2 Wrote:
Its not your normal FZS ?
(31-05-25, 02:44 PM)robbo Wrote: Sharp boxeye for sure ??
I was confused by the statement "Its not your normal FZS ?"
was he asking is mine not normal or was it normal or is he saying his is "not your normal FZS"
Anyway yes mine is a 98 Box eye and at last count was the oldest one on the forum registered May 98. The sticker you have on the side is for the back above the lights they dont originally go on the side panel
Here you go taken a couple of weeks ago. I took off the grab rail to fit a single seat conversion but it looked rubbish and when I cam to put the grabrail back I decided that i liked the look without the grabrail so left it off and put a little black vinyl patch over the holes. If you zoom in you can see.
I meant mines not normal, it was until some kind person reversed into it knocking it over onto its side.
So out with the old and in with the new, LEDs all round with dual front light conversion, smoke back and those fairing indicators.
The rear stickers were on when purchased bit now only one side after the knocking over incident causing the need for replacement.
I like to tinker so keeps me happy.
?
