+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Shock linkage bolts (/showthread.php?tid=80652)
Shock linkage bolts - Dudeofrude - 05-04-19
I'm fitting a new rear spring and jack up kit to my Gen 2, as with most thing if a jobs worth doing then it's worth doing right so I'd like to replace all the nuts and bolts while I have it apart.
Does anyone have any idea either what size or where I could buy the bolts that hold the linkages together?
I've included a picture showing the two bolts in question so you know what I'm on about
Cheers
Re: Shock linkage bolts - Dudeofrude - 07-04-19
Also does anyone know if I'll need a longer kick stand after fitting a Jack up kit??
Re: Shock linkage bolts - robbo - 08-04-19
I'm only using a 25mm jack up kit at present, but do use a lengthened side stand. Not essential but it would be if using a 50mm lift, especially if loaded with camping gear etc.
Re: Shock linkage bolts - Dudeofrude - 08-04-19
(08-04-19, 06:40 PM)robbo link Wrote: I'm only using a 25mm jack up kit at present, but do use a lengthened side stand. Not essential but it would be if using a 50mm lift, especially if loaded with camping gear etc.Cheers robbo, it's only a 30mm kit so I'm hoping I won't need one. My bike doesn't get graced with anything other than my ass so don't have to worry about loading it up haha doesn't even have passenger pegs/seat ?
Re: Shock linkage bolts - Dudeofrude - 10-04-19
(05-04-19, 06:55 PM)Dudeofrude link Wrote: I'm fitting a new rear spring and jack up kit to my Gen 2, as with most thing if a jobs worth doing then it's worth doing right so I'd like to replace all the nuts and bolts while I have it apart.
Does anyone have any idea either what size or where I could buy the bolts that hold the linkages together?
I've included a picture showing the two bolts in question so you know what I'm on about
Cheers
I had to get them from fowlers in the end. £20 for 3 nuts and bolts that was the cheapest around! They were even £7 each on fleabay!
Re: Shock linkage bolts - coffee - 11-04-19
Lanky foccers!!! I had to lower mine,being a short arse. :lol