Fazer Owners Club - Unofficial
Aftermarket handlebars FZ1 gen2 - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Aftermarket handlebars FZ1 gen2 (/showthread.php?tid=79152)

Aftermarket handlebars FZ1 gen2 - MedLey - 04-01-18

Hi guys, who have fitted aftermarked handle bars on yours fz1 ? i need to know wjat was the width of handlebars, and did you modified clutch/throttle cables, and wires?

Re: Aftermarket handlebars FZ1 gen2 - Dudeofrude - 04-01-18

I've got rizoma bars on mine wig the matching riser. They are about 2 inches lower than the originals so my brake lines have quite a bit of slack in them and just adjusted the clutch cable accordingly. I could do with replacing the brake lines for shorter ones but generally just can't be bothered haha

Re: Aftermarket handlebars FZ1 gen2 - Dudeofrude - 04-01-18

http://www.rizoma.com/universal/handlebars-clip-on-bars/ma005-008-006-009-011/en?MOTO=50412423-50462991-R

These ones. All the specs (width etc) should be on there

Re: Aftermarket handlebars FZ1 gen2 - MedLey - 04-01-18

oh, nice, so the 740mm width would be nice start, ok i will have it in my mind, that i can buy that kind of width handlebars, and dont have to be scared that cables will be too short Big Grin

Re: Aftermarket handlebars FZ1 gen2 - MedLey - 12-01-18

So thats it? everyone is riding with standart bars? Smile

Re: Aftermarket handlebars FZ1 gen2 - brooker81 - 12-01-18

I'm using rizoma bars as well with shorter venhill lines.

Re: Aftermarket handlebars FZ1 gen2 - Dudeofrude - 12-01-18

(12-01-18, 02:28 PM)brooker81 link Wrote: I'm using rizoma bars as well with shorter venhill lines.

Just out of interest did you measure and order the correct length or did you buy some for another bike ie R1, R6 etc etc?

Re: Aftermarket handlebars FZ1 gen2 - MedLey - 15-01-18

Will it fit ? https://road.renthal.com/shop/road-products/road-handlebars/road-se-bars?product_id=2017 no need extend brake lines?? its just 2cmm longer than standar, or 1 cm from one side and 1cm to toher Smile

Re: Aftermarket handlebars FZ1 gen2 - Nemesis - 15-01-18

I love the standard bars just right for me :lol

Re: Aftermarket handlebars FZ1 gen2 - brooker81 - 18-01-18

I had the lines made to order mate.