Potential FZS600 Box Eyr - Printable Version

Potential FZS600 Box Eyr - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: For Sale & Wanted (https://foc-u.co.uk/mybb/forumdisplay.php?fid=80)
+--- Thread: Potential FZS600 Box Eyr (/showthread.php?tid=78965)

Potential FZS600 Box Eyr - anutz - 24-10-17

Looking to see if intrest in my fzs600 boxeye in blue

Reasonable condition, standard all around aside from End Can, HyperPro Springs, and Braided Lines

reason for sale just not used any more, was a good first bike for me a few years back but no more

20K ish miles, MOT due this week so should hopefully pass with clean bill of health

[Image: IMG_1165_zps9ukj78kt.jpg]

NB - You can see the inner Clamp is reversed, this is where i had to get a engine shop to drill into a blank as i tried to remove the old stud and could not

[Image: IMG_1156_zpsutodgwrn.jpg]

Small dent in tank, literally from where i think bars have hit it at some point, not sure, and light scuff on fairing....

Had issue with snapped exhaust stud, ended up with Cylinder head off and repaired at engine shop by drilling into a blank opposite, no issues since and no corrosion on the studs as all replaced, well looked after

Treated with hammerite as needed.....etc

Did have R6 shock on but removed - might sell but may also re-use

Rear tyre loads left literally done a few hundred miles....nice end can etc

Calipers re-built by powerhouse, all smooth, front and rear, new seals etc the lot no rust on pistions

Rear end stripped and re-greased i.e. swingarm pivot back....

No issues with leaking for seals, no funny noises from timing chains etc, runs real nice, starts on the button

New battery also purchased for it when i got it so not original old one but 3 years old...

Been garaged, has been ridden in all weather no reason not too.

As said, good condition, not a minter, but ideal first bike, i just do not use, MOT check will show that i.e. low milage etc, 1500 miles between 2015 MOT and one i tried to get recently but failed due to brakes and electrical issue on headstock harness, brakes serviced and new headstock wiring loom fitted so expext MOT pass

Wont sell without one, so still may not sell if not happy etc....

Location North East - Durham

Cheers

Anutz

Re: Potential FZS600 Box Eyr - BBROWN1664 - 24-10-17

put the price and location along with a couple of pictures and people will respond more.

Re: Potential FZS600 Box Eyr - anutz - 24-10-17

will do BBROWN....ta need to get em uploaded

Re: Potential FZS600 Box Eyr - Northern Biker - 27-10-17

How much fella? Can't see a price :thumbup
I could be interested but it sounds like you're not entirely sure you want to sell it anyway!

Re: Potential FZS600 Box Eyr - anutz - 02-11-17

MOT passed, and had it out for a good ride so happy to sell, if anyone intrested let me know.

No advisorys - clean MOT pass

Re: Potential FZS600 Box Eyr - tommyardin - 02-11-17

still no price mentioned :rolleyes

Re: Potential FZS600 Box Eyr - anutz - 02-11-17

(02-11-17, 03:38 PM)tommyardin link Wrote: still no price mentioned :rolleyes

asking 1200...but prepared to accept offers etc

Re: Potential FZS600 Box Eyr - tommyardin - 02-11-17

(02-11-17, 04:59 PM)anutz link Wrote: [quote author=tommyardin link=topic=23434.msg270722#msg270722 date=1509633518]
still no price mentioned :rolleyes

asking 1200...but prepared to accept offers etc
[/quote]

1200 quid is not unreasonable, the bike could be a project that just needs a little TLC as you said its not a minter but also its certainly not a minger either.
Mine was in the same sort of condition when I purchased it, Mine is a 2003 and i paid £1925 for it 4 and a half years ago, since then I have injected some time and energy and a bit of dosh and it has made a great steed.
You say your willing to consider offers, could be a good buy for someone.
20K is no mileage.

Re: Potential FZS600 Box Eyr - anutz - 22-01-18

Any interest here?

Lovely weather for it :b

Re: Potential FZS600 Box Eyr - Skyjorkko - 23-01-18

[table][tr] [td]

We appreciate the information that was packed with quality that can not be reduced.

[/td] [/tr][/table]

Re: Potential FZS600 Box Eyr - hopefiendboy - 01-02-18

Have you still got the kit for the r6 shock conversion?

Re: Potential FZS600 Box Eyr - anutz - 01-02-18

yes.....i think so...

I have the shock and the dog bones, need to check if i have the bolt and spacers, i am sure i do, will check

Re: Potential FZS600 Box Eyr - hopefiendboy - 08-02-18

ok- message me if you do!