Fazer Owners Club - Unofficial
Fazer8 brake vibration - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer8 / FZ8 (https://foc-u.co.uk/mybb/forumdisplay.php?fid=76)
+--- Thread: Fazer8 brake vibration (/showthread.php?tid=78941)



Fazer8 brake vibration - Callmecollin - 18-10-17

Hi guys, yust bought a 2012 Fazer8 last week and I'm finding when I apply the front brake it feels like it's working a motor. There is quite a bit of vibration from it and can feel it most when I'm stationery.
The place I bought it from said that's the way it is, anyone out there have it happening to them?


Re: Fazer8 brake vibration - slappy - 18-10-17

Front brakes on any bike should be smooth with no vibration, discs could be warped, pads/pistons sticking, steering head bearings could need adjusting or replacing.
I don't understand what you mean when you say you can feel it most when stationery?


But if you bought it from a dealer or trader you should take it straight back and tell them to put it right or give you your money back.


Re: Fazer8 brake vibration - Fazerider - 18-10-17

If it happens when stationary I can only think it's a faulty ABS.


Re: Fazer8 brake vibration - celticbiker - 19-10-17

+1 for ABS unit.
Where are you based? Maybe someone could offer a second opinion.
I'd be happy to have a look if you are within 100 miles of Newport.


Re: Fazer8 brake vibration - Callmecollin - 19-10-17

Thanks for saying you would look at it for me but I live in Belfast.
The bike was taken back to the dealer's yesterday were they said, it's the way it is!
With the bike stationary and ticking over, when I pull the front brake lever even a few mm the vibration can be felt. Seems it comes from under the seat but could be wrong on that one.


Re: Fazer8 brake vibration - BBROWN1664 - 19-10-17

If its not the lever pulsing but from elsewhere on the bike I would go with the other people and say its the ABS pump.Find where it is and make sure its bolted down properly.