Let's try again.... Just bought another 1000 Fazer

Let's try again.... Just bought another 1000 Fazer - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Let's try again.... Just bought another 1000 Fazer (/showthread.php?tid=78702)

Let's try again.... Just bought another 1000 Fazer - reggit - 29-08-17

This time it looks to have been enthusiast owned and already had the suspension and other nice mods done. Bought from ebay, but suspecting the previous owner is on here.

Untitled by d.a.thornber@btinternet.com, on Flickr

and with its ugly sister....

Untitled by d.a.thornber@btinternet.com, on Flickr

Re: Let's try again.... Just bought another 1000 Fazer - PieEater - 29-08-17

Nice, just comparing the condition of the down-pipes is a story in itself.

Re: Let's try again.... Just bought another 1000 Fazer - ste131 - 29-08-17

Big Grin

I forgot to give you the original bar ends. I will post them out to you.

Re: Let's try again.... Just bought another 1000 Fazer - reggit - 29-08-17

(29-08-17, 07:01 PM)ste131 link Wrote: I forgot to give you the original bar ends. I will post them out to you.

Cheers ?

Re: Let's try again.... Just bought another 1000 Fazer - ste131 - 30-08-17

Posted the bar ends today. I bought aftermarket alloy ones and then noticed the bars buzzed. Would be a good addition to the Renthals. M16x1.5mm tap and about half inch lopping off the bars.

Re: Let's try again.... Just bought another 1000 Fazer - reggit - 31-08-17

(30-08-17, 09:50 PM)ste131 link Wrote: Posted the bar ends today. I bought aftermarket alloy ones and then noticed the bars buzzed. Would be a good addition to the Renthals. M16x1.5mm tap and about half inch lopping off the bars.

Cheers Ste,

Away on hols at the minute, job for when I've got rid of its 'ugly sister' and have a bit of room!
See what you mean about the buzzing, but it's not too intrusive. Used to riding an old 2 stroke-everything is smooth after that!

Re: Let's try again.... Just bought another 1000 Fazer - Dustydes - 01-09-17

I used R&G stainless, slightly less weight but no buzz. Tapped and not cut down 758's and bar end mirrors so I can now see behind me with ease.

Re: Let's try again.... Just bought another 1000 Fazer - spinus - 02-09-17

what a cracking bike
quick question where yours has the Yamaha symbol on the tank mine has Yamaha written
does that make mine earlier ?
how many miles
I opologise for being nosy but its a cracker

Re: Let's try again.... Just bought another 1000 Fazer - reggit - 02-09-17

It's a credit to its previous owner! It's got around 34,000 on it. It's an 03 plate, the black one it a 52 and has 'yamaha' rather than the tuning fork logos. Also the speedo on the newer one is marked 10,20,30 etc, rather than 20, 40, 60 etc.
I guess the slight change bits have been in 2003 sometime!

Re: Let's try again.... Just bought another 1000 Fazer - spinus - 03-09-17

yep must be
mines a 52 reg when I figure out how to upload photos il lput some up
cheers

Re: Let's try again.... Just bought another 1000 Fazer - Andy W - 03-09-17

Nice one reggit! Now you can get on with riding instead of problem solving! Big Grin

Looks like a corker of a bike!

Re: Let's try again.... Just bought another 1000 Fazer - reggit - 06-09-17

I just can't help myself when it comes to gadgets!

Just fitted:

Untitled by