+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Alarm wiring question (/showthread.php?tid=78633)
Alarm wiring question - solorider - 18-08-17
in the process of doing my bike up I have changed the wiring harness, on the "new" harness there is 2 plugs with one of them having a joining wire, I presume this is for the alarm, so anyone know which wire does what and can you buy the plugs? My old harness didn't have these plugs.
Re: Alarm wiring question - Gaz66 - 21-08-17
Hi ya.
Is it the 2 white 2 pin plugs just rear of the battery box you refer to?
Does the bike run?
If not both 2 pin plugs need a jumper wire in each plug, i believe 1 plug is fuel cut off & 1 plug is ignition cut off.
Bike should then run ok.
I had to jump both mine when when i Unpicked a Meta alarm that went tits up.
Hope this helps matey..
Re: Alarm wiring question - solorider - 22-08-17
One of the plugs does have a jumper in it but I think the other is missing, I do have an alarm to fit and would rather use those plugs rather than splicing into the harness, but I need to find out which wire does what.
Re: Alarm wiring question - Dustydes - 23-08-17
Have a look sat my post 8 down. Interlock started by Dustydes
I cant help you more than that as no idea myself but someone with electrical knowledge could test/trace wires.
Read all reply's in post.
Des