![]() |
carb jets on pods - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: carb jets on pods (/showthread.php?tid=77787) |
carb jets on pods - Disorderlypunk - 27-03-17 ok so my C-Head came off today for stud drilling and i foresee the problems getting the carbs back in so going to fit pods was going to in future anyhow so might aswell save some trouble and do it now i think i have the jet sizes sorted but my question is what type of carbs are they, what type of jets [size=1em]and where is worth getting decently priced jets from?[/size] -any help advice would be greatly appreciated and if you have pods and know your jet sizes posting here wouldnt hurt (easier for others to find) Re: carb jets - Disorderlypunk - 30-03-17 seems this topic is scaring people so after some hunting i have found info using pods say 125 outer carbs and 127.5 inners rubyracer also found this info so i asked him for help/advice within 24hours i got a reply telling me to think again about this route but me being me guess what im going ahead anyway (not using k+n's just yet as im skint) but will go down the dyno route once close enough - rubyracer is on hold at moment so maybe i will catch up in the meantime so if you want to see the on the road project develop get yourself on youtube and subscribe to www.youtube.com/channel/UCvWtJO9iyS8XsR9RNHx72UQ it may have me talking bollox at time on rideouts but i try and involve the workshop as much as i can but get rubyracers blog on your bookmarks aswell as i found it really interesting/informative/inspirational (im not brown nosing lol) www.rubyracing.com/RubyRacer-1.html Re: carb jets on pods - Ruby Racing - 30-03-17 Thanks for the plug and apologies to everyone for the lack of progress on my build. Caused by having to prep a new bike for track duties when my previous one shat it's gearbox and crank! Further delays possible as just bought a 2001 ZX-7R and am now modding that (suspension front and rear, shedding weight) for track use also. Sorry! Re: carb jets on pods - Disorderlypunk - 04-04-17 ok i have had some success - using 125s in 1+4 and 127.5s in 3+4 with the circlip on the fourth groove down i am only using cheap chinese pods for now untill i can afford k+n's and new exhaust system then will be down the dyno to get her properly setup have uploaded a video on my youtube channel- link should be in my signiture Re: carb jets on pods - joebloggs - 04-04-17 Had my old Katana set up by an engine tuner with nothing more than a fuel air meter. I complained re throttle response and he told me to roll the gas on not wack it wide open, worked a treat, soon got used to it, I think most expect to be able to abuse the throttle as they did with the airbox in place and of course it hesitates so they think they have a problem. I must have done 20k with filters and was no different to stock once you got the feel for it Re: carb jets on pods - Disorderlypunk - 04-04-17 strangely i even mention rolling on the throttle in the video lol taking it on a long run on friday so hopefully will get used to the change in engine characteristics Re: carb jets on pods - joebloggs - 04-04-17 Just watched your vid, seems to be pulling OK, just one thing, where some focin gloves, makes me cringe to see riders without any on Re: carb jets on pods - Disorderlypunk - 04-04-17 i normally do - it was a quick blast up the village so wasnt too fussed but they say most accidents happen close to home aswell - if i buy some shorts a tshirt and some trainers i get a sweet gixer bro. :lol Re: carb jets on pods - joebloggs - 05-04-17 (04-04-17, 11:56 PM)Disorderlypunk link Wrote: i normally do - it was a quick blast up the village so wasnt too fussed Didn't mean to sound like a boring old focer, just hard enough to get kids to wear protective clothing without experienced riders showing them how not to dress when riding. Now where are my pipe and slippers............... Re: carb jets on pods - Disorderlypunk - 08-04-17 i have the slippers but i must be young as i only have a vape machine (there is a pipe somewhere but it it doesnt hold tobacco lol) |