![]() |
Rpm signal jumping - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Rpm signal jumping (/showthread.php?tid=76720) |
Rpm signal jumping - petters - 02-10-16 The rev counter on my bike has been jumping and falling out and beeing wild for a while now, and today I fitted a Koso and I still have the problem. Is there a sensor anywhere? Re: Rpm signal jumping - darrsi - 02-10-16 Where is it jumping to and from, what rpm? Re: Rpm signal jumping - petters - 02-10-16 Its all over, and sometimes when the enegine is not started, sometimes fron 2000rpm to 8000rpm and sometimes it shows nothing at all. Re: Rpm signal jumping - darrsi - 02-10-16 On the right side of the carbs there's a Throttle Position Sensor (TPS), unplug it and see if the rpm needle becomes more settled, once unplugged it should go between 0rpm and 3000rpm. If it does this in a controlled manner you may have a knackered TPS. The black plug sits on number 4 carb with a wire going into it, you'll need a key or flat screwdriver to release the catch on it to unplug it. |