+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Retrofitting HID projector mk2 2002 fazer (/showthread.php?tid=76715)
Retrofitting HID projector mk2 2002 fazer - jamie16v - 02-10-16
Hello guys, yesterday i retrofitted a HID projector kit into my headlamp. when fitting the kit it came with the H4 adapter rings to clamp the projector into the headlamp reflector housing. i noticed that this caused an approximate 30-50 degree angle on the projector which seems to angle the beam towards road signs and away from oncoming vehicles (up to the left down to the right) i know that right hand drive vehicles are supposed to be this way but this pattern seems extreme.
From seeing images on the net, the beam seems horizontal with a central dip which lowers to the right. where as my beam seems diagonal.
these are the projectors i fitted http://www.ebay.co.uk/itm/152028284543?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
anybody here noticed anything like this?. TIA
Re: Retrofitting HID projector mk2 2002 fazer - jamie16v - 02-10-16
Or is this normal perhaps? I noticed that its the hradlamp housing that causes the tilt (being rhd).
Re: Retrofitting HID projector mk2 2002 fazer - jamie16v - 03-10-16
Ive figured out the issue, its an dot type pattern and not the ece european pattern. Ive got some RHD EURO pattern ones on the way. :\