![]() |
EXUP cables - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75) +--- Thread: EXUP cables (/showthread.php?tid=75032) |
EXUP cables - NorthWestern - 24-02-16 Just wired my exup valve fully open... I got rear ended while at a junction the other day which shunted my exhaust forward crushing the silencer and link pipe. I thought that was more or less the full extent of the damage (the undertray/reg plate were also both broken) and straightened/bashed the pipe (which needed welding as it split at the crease) +silencer back to allow me to use it for my daily commute. It seems that the shunt also bent the headers forward a few inches which snapped both my exup cables so for the last couple of days the bike has been unable to pull up to motorway speeds any faster than a transit van! I can't straighten the headers without removing and looking at the bolts/clamps at the engine side they will likely never go back on, or come off without breaking, we got them bent back a bit but I had to "modify" the center stand bump stop arm to get it to sit on the link pipe stop plate. It has no doubt increased the mass centralisation a bit though... So, looking around new exup cables are pretty expensive or there are pattern ones for around £35. Anyone used them? Or is it worth risking second hand ones. I seem to remember someone talking about a rebuild kit from Venhill IIRC but I can't find any for sale. Re: EXUP cables - Falcon 269 - 24-02-16 If you got rear-ended, shouldn't the other driver's insurance be paying for a new exhaust system and all the other damage? Re: EXUP cables - RMT1983 - 24-02-16 I'm sure ive got some kicking around.................... PM me if 2nd hand isn't a problem Re: EXUP cables - NorthWestern - 24-02-16 I am just covering bases really falcon. I've seen bikes worth more written off with similar damage... If that is the case I would be wanting to get it back on the road as quickly as possible etc will pm you rmt when I find out what's happening cheers |