+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: For Sale & Wanted (https://foc-u.co.uk/mybb/forumdisplay.php?fid=80)
+--- Thread: FZS1000 Radiator & Fan (/showthread.php?tid=73478)
FZS1000 Radiator & Fan - RMT1983 - 10-08-15
As Above............. Could do with a clean............. £85
Re: FZS1000 Radiator & Fan - b1k3rdude - 10-08-15
@RMT, dude I strongly recommend you clean that rad -
- Remove the fan, surround, guard & side guards - be careful undoing the 3x 10mm screw nuts, if them wont budge either gently hold the rad spigots with pair molegrips or worst case cut the bolts off with a dremel.
- Then give the bare rad a soak it in the bath with a small amount of washing powder to loose and remove all that crud.
- Then get it "very gently" soda blasted (its soft enough not to cause damage).
- Then if the rad still looks sound, go buy a can of grey etch primer and black gloss (3-4 thin coats of primer and then 3-4 of black leaving enough time between coats.)
- You could either get the fan surround and front guard powder coated ot just get them soda blasted and paint them as well.