Centre stand stop with replacement can - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Centre stand stop with replacement can (/showthread.php?tid=73021)

Centre stand stop with replacement can - Pal - 25-06-15 The centre stand stop is part is the link pipe, and I wanted to fit a replacement can and pipe, but don't want to lose the centre stand stop. Has anyone come up with a good solution to this? I can't be the first to ask this, but couldn't find anything with a search. Re: Centre stand stop with replacement can - Nightfury - 25-06-15 SP Engineering pipes come with the stop on the link pipe. http://www.spengineering.co.uk/ http://www.ebay.co.uk/itm/Yamaha-FZS600-98-04-SP-Engineering-Polished-Stainless-Stubby-Big-Bore-Exhaust-/281582074693?pt=LH_DefaultDomain_3&hash=item418f997b45 Thats my bike in the listing. They also gave me 10% off for mentioning the forum  :lol Not sure about other manufacturers, find one you like the look of and email them to ask if it has the stop. Re: Centre stand stop with replacement can - Pal - 25-06-15 I already have the can, a Fuel one, got from eBay for £50, and I also have some Motad downpipes which have the stop on them, I just wanted to fit the can first, so dozy commuters stand more of a chance of realising I'm there, and fit the downpipes just before the MoT next year (cos I'm tight) I just wondered if anyone had come up with a genius idea for a stop. Re: Centre stand stop with replacement can - darrsi - 25-06-15 Mine has one on my SP Engineering exhaust. Re: Centre stand stop with replacement can - bandit - 25-06-15 Just an idea! what about a car U-shaped exhaust bracket of the correct diameter to go around the pipe so the stop hits one of the studs or make a fashioned metal bracket bolted to the clamp for the stop to hit?. Bracket like this of correct diameter:   https://www.clampcouk.co.uk/exhaust-repair/exhaust-clamps/standard-8mm-thread-exhaust-u-bolt-clamps.html Re: Centre stand stop with replacement can - Freck - 25-06-15 Isn't the stop fitted on the link pipe between the headers and the can? All the aftermarket ones I've seen are like this, assuming they're specific to the Fazer. You can just buy a link pipe on its own from most manufacturers, Fuel included. I've not seen any where the stop is fitted to the headers/downpipes, surely they're too far forward. Steve Re: Centre stand stop with replacement can - mtread - 25-06-15 My Fuel one has a stop on their supplied linkpipe. Surely the downpipes (I have Motad as well) are too far forward for the stop to hit ? Re: Centre stand stop with replacement can - Pal - 26-06-15 I thought the tab at the rear of the Motad downpipes was for the stop, I could be wrong. Have you got pics of the Fuel set up, the Fuel can I got from eBay came in a box, with paperwork for a CBF600, so I asked the seller who confirmed it was for a Fazer, I'm no so sure now! Re: Centre stand stop with replacement can - Freck - 26-06-15 The tab at the rear of the downpipes is to bolt them to the frame just forward of the right hand footpeg. Edit - apologies, they are bolted to the footpeg itself Steve Re: Centre stand stop with replacement can - mtread - 26-06-15 OK I'll take a picture of the Fuel setup and post tomorrow Re: Centre stand stop with replacement can - mtread - 28-06-15 Here you go. Fuel can Link pipe showing cconnection to headers and end can and from underneath, showing centre stand stop against link pipe bracket Re: Centre stand stop with replacement can - Pal - 28-06-15 Fantastic, just what I needed. Will be able to sort this out now I know what I should have. Cheers Re: Centre stand stop with replacement can - mtread - 29-06-15 Glad to help