+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: chinese levers (/showthread.php?tid=70771)
chinese levers - bri h - 01-11-14
hello gents a quick word of warning. i bought a pair of clutch/brake levers of a link somebody posted on here, the clutch was fine but the brake lever wont fit my 08 gen two. still at 16 quid it was worth a punt. the brake lever is too wide to fit into the bracket, i dont know if they will fit a gen one but if anyone wants to try them they are welcome to them.
Re: chinese levers - mickvp - 01-11-14
I had a problem with one of mine when I bought em too (the clutch lever side though). I emailed the seller and they sent me another pair out FOC, pretty nice of them. Just a thought for you anyway, might be worth getting in touch in case it has been a genuine mistake.
Re: chinese levers - devilsyam - 01-11-14
i have pair of folding ones clutch fouls switch gear seller is arguing the toss even after i sent him a picture
Re: chinese levers - bri h - 02-11-14
thanks gents i got then on ebay and paid by paypal so i will try and get my money back at least.
Re: chinese levers - tex - 02-11-14
i had similar issues , clutch was fine, but brake was slightly different , gave far to much travel, could go right back to throttle if squeezed hard.
Re: chinese levers - bri h - 02-11-14
Ive taken micks advice and emailed them so ill see what happens to be fair i wasnt expecting to much for something that cost one tenth of pazzo levers.
Re: chinese levers - nickodemon - 16-11-14
I have ordered several sets for different bikes and they all fitted fine. The only issue with the gen 1 ones are you have to remember to use the bush out of the original clutch lever.