+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Ivanised? (/showthread.php?tid=70232)
Ivanised? - donut - 08-09-14
How can I tell if my Gen 1's been Ivanised in the past?
I've got a dyno chart showing 137 at the wheel, and a very smooth power curve, so am suspecting it has, but wonder if there's any physical way of telling?
Re: Ivanised? - Falcon 269 - 08-09-14
That sort of bhp figure suggests Full Monty, so check the airbox lid & air filter first.
Next, you could check one of the needles but airbox lid is easier.
Re: Ivanised? - wideload - 27-10-14
Well mine has 131bhp at the wheel and only got K&N air filter and after market can on it.
Re: Ivanised? - Stupid Luke - 27-10-14
(27-10-14, 01:10 AM)wideload link Wrote: Well mine has 131bhp at the wheel and only got K&N air filter and after market can on it.
That figure sounds quite a lot even with a full monty. The next thing that nicks a few BHP is the exup valve, unless of course there is a full system is fitted.
Different dynos give different readings though, Stan Stephens one was reputed to be the most generous around here.
Re: Ivanised? - Ian-man - 27-10-14
Mine is 139bhp at the back wheel. With full monty.
Re: Ivanised? - JoeRock - 28-10-14
All a bit of a dick wagging exercise unless its on the same dyno, at the same time!
Re: Ivanised? - Mick-H - 28-10-14
Could try getting in touch with previous owner (log book) and ask him/her.
Re: Ivanised? - richfzs - 28-10-14
or ask Mike (Falcon 269) if its on his list as one he's done...