fazer fork bottoms - Printable Version

fazer fork bottoms - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: fazer fork bottoms (/showthread.php?tid=67725)

fazer fork bottoms - Kentish - 14-03-14

anyone know what colour silver to use on the foxeye? can they be sprayed without taking them apart?

Re: fazer fork bottoms - Chris - 15-03-14

Not sure about colour.

I took mine off the bike and sanded them then hung them from the garage roof with some wire through the axle holes. I sprayed mine black and they look much nicer in my opinion.

If I was to do it again I'd take them apart and get them powder coated.

Chris

Re: fazer fork bottoms - MarkWales - 15-03-14

Mine I think are clear coated - I was thinking of going black with mine

Re: fazer fork bottoms - chunk166 - 15-03-14

(15-03-14, 12:56 AM)Chris link Wrote: Not sure about colour.

I took mine off the bike and sanded them then hung them from the garage roof with some wire through the axle holes. I sprayed mine black and they look much nicer in my opinion.

If I was to do it again I'd take them apart and get them powder coated.

Chris

Have you got a picture,mine have been stripped back to the alloy but its a crap job as bits have been missed!!

Re: fazer fork bottoms - griff86 - 15-03-14

I got my lowers and swingarm powdercoated at Triple S in Bingley.

Re: fazer fork bottoms - MarkWales - 15-03-14

I like the Black forks and swing arm

At this rate my bike will be more black than silver lol

Re: fazer fork bottoms - ChristoT - 15-03-14

(15-03-14, 08:22 PM)MarkWales link Wrote: I like the Black forks and swing arm

At this rate my bike will be more black than silver lol

Faster then! :lol

Re: fazer fork bottoms - chunk166 - 15-03-14

That looks good :b

Re: fazer fork bottoms - Chris - 16-03-14

Here's mine, I'll see if I have any better pics of the forks...

http://www.detailingworld.co.uk/forum/showthread.php?t=307830&highlight=yamaha+fazer

Chris

Re: fazer fork bottoms - theglove1978 - 16-03-14

Lovely blue Fazer! Liking the black fork bottoms Smile

. Its a part of my Fazer which really spoils it. Everything else is pretty clean for the age of the bike but let down by the nasty corrosion on the forks.

I have access to a powder coater but assume its not an easy job removing the forks so a job for later in the year.

Re: fazer fork bottoms - Chris - 16-03-14

Thanks, Big Grin

removing the forks isn't too hard, just got to make sure they're all lined up right when you put them back on. haha.

Chris

Here's a better pic of the front end:

[Image: 006-1.jpg]