+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: alarm wiring question (/showthread.php?tid=67552)
alarm wiring question - solorider - 04-03-14
anyone know where the alarm wiring plugs are on a gen 1 is? looking at pictures on the net mine does not have a plug there, so any help would be appreciated.
thanks
Re: alarm wiring question - Stradaman - 04-03-14
The alarm loom wires are under seat near side, 2x 4 pin plugs and 1x3 pin plug, if non EU model there are no plugs.
Re: alarm wiring question - solorider - 06-03-14
Still can't find the plugs, I know my hoe is a uk spec machine as I phoned yamaha just after I bought the bike and they told me it is a uk spec bike. So any pictures etc would be appreciated.
Re: alarm wiring question - Stradaman - 06-03-14
Take your seat off, look to the near side of the frame and the 3 plugs will be mid way along it, you may find that a previous owner had an alarm fitted then removed so the plugs have been taken off as well.
Re: alarm wiring question - solorider - 07-03-14
(06-03-14, 07:11 PM)Stradaman link Wrote: Take your seat off, look to the near side of the frame and the 3 plugs will be mid way along it, you may find that a previous owner had an alarm fitted then removed so the plugs have been taken off as well.all 3 plugs were removed and most of the wiring as well, I only found 3 wires and they were for the rear indicators and an earth.