+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=65)
+--- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=69)
+--- Thread: Modifications (/showthread.php?tid=67387)
Pages:
1
2
Modifications - adeejaysdelight - 20-02-14
I thought it might be a good idea to start a thread dedicated to the modifications we have done to our Fazers. Most of us, if not all, have done a mod or two during the ownership of our steeds. This might be a good place for us to have a look at what others have done and maybe get some ideas as to where we should spend that extra money we have, even if it’s only a few quid.
I suggest we break it down into sections so we can quickly refer to an area of particular interest to us, without having to read everything everyone has done, every time we come to the thread.
I did all of my upgrades and mods myself, with the exception of a few that were on the bike when I bought it. It doesn’t matter if you did the work, you had it done or it was on there when you bought it. All that matters is that it is NON STANDARD.
So, without further ado, I will get the ball rolling…
Engine
Repainted in black
K & N air filter
Carburettor balance
Iridium spark plugs
Leo Vince 4-1 full system, with carbon fibre silencer (w/o baffle & polished to the nines)
Wheels and tyres
White wheel rim tape
Final drive
1 tooth less front sprocket
1 tooth up rear sprocket
Gold x-ring DID chain
Suspension
FG Gubellini rear shock
15w fork oil
Jack-up dog bones
Brakes
Hel braided hoses
DOT 5.1 fluid
Rebuilt callipers
Polished rear calliper
Electrics
Alarm, immobiliser and remote starter kit
HiD headlamps (both lamps run full time)
LED bulbs all round
LED blue dash bulbs
12v aux socket
Digital gear change indicator
Aesthetics
Carbon fibre yolk cover
Carbon wrapped side covers
Carbon fibre tank protector
Carbon fibre fender extender
Aluminium racing exhaust hanger (pillion foot rests removed)
Upgrades
Ermax rear hugger
Crash bobbins
Billet aluminium racing bar ends
Long stem mirrors
Comfort & pleasure
Viper touring seat
Double bubble black screen
Heated grips
GPS/Phone mount
HD sports camera
Ventura luggage system
Scottoiler v system
Gold extra wide streefighter handlebars
Stomp grips
I have this feeling that as soon as I post this I will remember 4 things that I cannot think of right now. Anyway, let’s see what all you guys spend your hard earned on.
Re: Modifications - ChristoT - 20-02-14
When you say LEDs all round - where? Any chance of a pic of your headlamps?
What's the effect of the sprocket mods? Any good?
Re: Modifications - adeejaysdelight - 20-02-14
LED's all round... EVERYWHERE! (except the headlamps, they are HiD as stated
)The sprocket mod is ace. I have only been out twice since doing that, but that baby flies. I accelerates like a totally different bike.
Re: Modifications - ChristoT - 20-02-14
(20-02-14, 10:28 PM)adeejaysdelight link Wrote: LED's all round... EVERYWHERE! (except the headlamps, they are HiD as stated
The sprocket mod is ace. I have only been out twice since doing that, but that baby flies. I accelerates like a totally different bike.
:useless
I ask as a mod I'm considering is HID headlamps or projectors, but with a ring of LEDs as running lights round the outside.
How does the sprocket mod affect top end? I'm guessing it makes 1st even shorter than it already is?
Re: Modifications - adeejaysdelight - 20-02-14
Its dark, cold and the football is on. You will have to wait for a picture mate. My garage is way at the back of the house :rolleyes .
The top end comes faster and you loose a little bit of speed. But when was the last lime you maxxed out in sixth? The fuel economy has dropped to. About 40 miles from the tank has gone. Probably caus I'm whoreing it everywhere though.
Re: Modifications - bigbluebear - 20-02-14
Ivanised 135bhp at back wheel
Nitron rear shock
Racetech front fork springs
Renthal 773 bars
Renthal grips
Chrome yolk cover
Hel braided lines x 3
Brembo master cylindar
SBS race sintered pads all round
Front sprocket down a tooth
New rear sprocket
Gold DID chain
Rear hugger
Jack up dog bones
Clear indicator lenses
Mercury race can ( no baffles)
Powder coated wheels
Chrome bar ends
Belly pan
Crash bobbins
Chrome radiator cover
Chrome dust caps
Dual spark spark plugs
Fully serviced including valve clearance and new shims, linkages serviced, carbs balanced, dyno tested for better fueling (was running rich), exup serviced, new air filter, new battery
And cleaned and polished meticulously now in mint condition
Re: Modifications - Andy FZS - 20-02-14
Chrome yoke cover sounds good where was it from.
Andy
Re: Modifications - bigbluebear - 20-02-14
(20-02-14, 11:35 PM)Andy FZS link Wrote: Chrome yoke cover sounds good where was it from.
Andy
Was on it when I bought the bike
Re: Modifications - Andy FZS - 20-02-14
Ok ta. Anyone else know?
Re: Modifications - devilsyam - 20-02-14
Very conservative me - alloy valve caps lol
Re: Modifications - Andy FZS - 20-02-14
I think someone is fibbing. ....
Re: Modifications - devilsyam - 20-02-14
Ok hands up I did polish them
Re: Modifications - Mattsplat - 23-02-14
Full Akrapovic Ti Exhaust.
DNA filter.
Remapped ECU.
AIS removed.
Iridium plugs.
FI Sync'd.
Nitron 3 way sport shock.
08 R1 radial forks.
6 pot radial brakes.
Brembo radial Master cylinder.
CNC levers.
Comfort seats.
MRI screen.
R&G bar end sliders.
Chinky crash mushrooms.
Casing sliders.
Rear axle sliders.
Fork sliders.
Zumo 660.
SW Motech Blaze saddlebags.
150 RWHP.
Still not fast enough...
Re: Modifications - Red Ceri - 23-02-14
Pretty Much all bolt ons for mine,
Engine:
4deg ignition advancer
Ivans slip on kit, done by Mike
BMC Filter
Micron Carbon can on a standard link pipe (cut off damaged std silencer)
AIS removed
Bodywork:
Yamaha Bellypan,
Pollini(?) Extended Dark Screen
Oberon Frame Plugs
Oberon Handlebar Bar Ends
Fake carbon top yoke protector
Givi rack and pannier frame
Front Fender extender
Rear Hugger
Electrical:
Oxford Heated grips
Autocom intercom
Sat-nav wired in
All the above ignition switched via a 'Fuze Block' under the seat
Meta Alarm -soon to be removed/replaced as internal battery is on it's last legs.
Other:
Scottoiler
HEL Braided Brake lines
Stainless Brake Disc Bolts and Sprocket nuts
CMC Adjustable Brake and Clutch levers
BMW S1000RR Rear Shock
Didn't think I'd actually done that much but looking at the list it seems I have, the only things on the bike when I got were the Front Fender Extender and Hugger.
Re: Modifications - Doddsie - 23-02-14
Not chrome, but mirror polished......
http://www.ebay.co.uk/itm/YAMAHA-FAZER-600-MIRROR-POLISHED-STAINLESS-STEEL-TOP-YOKE-COVER-FZ-FZS-600-/161216556822?pt=UK_Motorcycle_Parts&hash=item2589416f16
Re: Modifications - Andy FZS - 23-02-14
The lists of mods look good would be even better with a few pictures.
Andy
Re: Modifications - slimwilly - 23-02-14
(23-02-14, 01:07 PM)Mattsplat link Wrote: Full Akrapovic Ti Exhaust.
DNA filter.
Remapped ECU.
AIS removed.
Iridium plugs.
FI Sync'd.
Nitron 3 way sport shock.
08 R1 radial forks.
6 pot radial brakes.
Brembo radial Master cylinder.
CNC levers.
Comfort seats.
MRI screen.
R&G bar end sliders.
Chinky crash mushrooms.
Casing sliders.
Rear axle sliders.
Fork sliders.
Zumo 660.
SW Motech Blaze saddlebags.
150 RWHP.
Still not fast enough...
Do you not need a FCE? or is it controlled ok by the re-map
Re: Modifications - sadlonelygit - 23-02-14
ivans (fitted by me)
modded airbox
quill can
R1 front end
gsxr 750 springs
goodridge 2 line front
16mm radial m/c
spazzo levers
renthals
airblade screen
clock mounted sat nav bracket
12v socket
led blinki's
R6 shock and homemade dogbones
single hel rear line
hugger
bellypan
footrest riser plates (homemade-ish)
givi top rack
givi wing rack (homemade fitting kit as never meant for fzs1000)
2001 headlight switch + home made subloom
ais removed (homemade blanking kit)
my own spray job
![[Image: 2013-07-14194025_zpsecd7512d.jpg]](http://s86.photobucket.com/user/homeorwork1/media/2013-07-14194025_zpsecd7512d.jpg.html)
Re: Modifications - Punkstig - 23-02-14
Tiger print
I need not mention anything else!
Re: Modifications - Kosmic Kartman - 23-02-14
Renthal 789 Street Fighter bars
Renthal bar grips
AG Racing bar ends
Pazzo leavers - short
Bar risers
R1 USD fork conversion (5PW) and Mudguard
Venhill brake lines
Custom brake res cover
Ivans Jet kit (Full Monty)includes:
BMC air filter
Modified air box
Modified carb manifold rubbers.
4 degree ignition advancer
Manual cam chain tensioner
S & P Engineering carbon end can with Blue Flame link pipe
Chrome engine covers
Gilles rear sets
Aluminium crash bungs... Cruiser pegs
Braced swinging arm
R6 rear shock in yellow
Stainless jack up dog bones
Wavey rear disc
LED indicators
Mirror blanking plates
Bar mounted mirrors
12v power supply
Sat Nav
Chrome tyre valve caps
Titanium brake caliper bolts
Titanium rear spindle nut
Stainless disc bolts
Gold anodised engine bolts
Rainbow strobes on head lights
Bling rings on speedo and clocks
Carbon clock surround
AIS removed
Dale Walker Holeshot blanking plugs fitted
Yamaha belly pan
Stainless chain guard
Tinted screen
Devilsyam frame plugs (Mk1... The best!)
Modified rear mudgaurd
Custom made graphics
Scottoiler
Datatool alarm
Datatag
Numerous gold anodised bolts fitted
Two tone audible warning device
Think that's about it really.
Nearly forgot to mention wheel rim tape :-) lol
Oh and a few more pics of my splendid bike.
![[Image: 19022012150.jpg]](http://s150.photobucket.com/user/adthebad/media/Kosmics%20bikes/19022012150.jpg.html)
![[Image: 13052012190.jpg]](http://s150.photobucket.com/user/adthebad/media/Kosmics%20bikes/13052012190.jpg.html)
![[Image: 19022012155.jpg]](http://s150.photobucket.com/user/adthebad/media/Kosmics%20bikes/19022012155.jpg.html)
![[Image: Bellypan1.jpg]](http://s150.photobucket.com/user/adthebad/media/Kosmics%20bikes/Bellypan1.jpg.html)
![[Image: _DSC0694.jpg]](http://s150.photobucket.com/user/adthebad/media/Kosmics%20bikes/_DSC0694.jpg.html)