![]() |
Speedo Sensor - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Speedo Sensor (/showthread.php?tid=67364) |
Speedo Sensor - hightower - 19-02-14 So, my bike is back together again and it seems fine on first test. However, the speedo wasn't working - took wheel off again and two snapped lugs (apparently a common thing). Anyone know where to get part 15 on this link? http://www.yamahamotorcyclespares.co.uk/genuineparts/9655/41/yamaha%20fzs600%20fazer/meter?uid=0 Re: Speedo Sensor - Buzz - 19-02-14 You mean cheaper than the £19.61 you can get it for by clicking "Add to Basket"? Couldn't find anything cheaper using the part number 5RB2517G0000 Re: Speedo Sensor - hightower - 19-02-14 Yeah, that's what I meant ![]() Will give it a couple days and see if anyone has suggestions before ordering from there. Can live with no speedo for a day or two. Re: Speedo Sensor - Dead Eye - 19-02-14 eBay might have a few options, or a breakers Wemoto has it at £16.06 (plus postage?) Re: Speedo Sensor - Punkstig - 19-02-14 Just buy that one- it's the updated one where the top end with the lugs is plastic, much more resilient than the entirely ceramic one and cheaper too! Re: Speedo Sensor - hightower - 20-02-14 Thanks, ordered from We Moto - was about 50p cheaper. We have a motorcycle salvage yard about 1 mile away - tried phoning them but would only sell the unit as a whole, and wanted £30 for it. Re: Speedo Sensor - hightower - 26-02-14 Ok, part arrived - how easy are these to fit as not sure it's covered in workshop manual? Does the old simply pull out? Re: Speedo Sensor - Dead Eye - 26-02-14 It's a nice simple job, if not just a little fiddly making sure that it stays in position whilst you try to get the axle bolt back on when refitting the wheel ![]() ![]() Re: Speedo Sensor - Punkstig - 26-02-14 The resistance you feel when pulling out the old one is just the force of the magnets- it's not physically connected to anything! Re: Speedo Sensor - mtread - 26-02-14 I've just bought the plastic one in advance. Because my front wheel is coming off for a tyre change, and the ceramic lugs have been superglued back on twice already.... |